Initial data commit

Task/Input-loop/00-META.yaml

@@ -0,0 +1,3 @@
+---
+from: http://rosettacode.org/wiki/Input_loop
+note: Text processing

Task/Input-loop/00-TASK.txt

@@ -0,0 +1,13 @@
+{{selection|Short Circuit|Console Program Basics}}
+[[Category:Basic language learning]] 
+[[Category:Streams]] 
+[[Category:Simple]]
+{{omit from|PARI/GP|No access to streams other than input}}
+{{omit from|TI-89 BASIC}} <!-- No streams other than user input, not really applicable. -->
+
+;Task:
+Read from a text stream either word-by-word or line-by-line until the stream runs out of data. 
+
+The stream will have an unknown amount of data on it.
+<br><br>
+

Task/Input-loop/AArch64-Assembly/input-loop.aarch64

@@ -0,0 +1,160 @@
+/* ARM assembly AARCH64 Raspberry PI 3B */
+/*  program inputLoop64.s   */
+
+/*******************************************/
+/* Constantes file                         */
+/*******************************************/
+/* for this file see task include a file in language AArch64 assembly*/
+.include "../includeConstantesARM64.inc"
+
+.equ BUFSIZE,  10000
+.equ LINESIZE, 100
+
+/*********************************/
+/* Initialized data              */
+/*********************************/
+.data
+szMessErreur:     .asciz "Erreur ouverture fichier input.\n"
+szMessErreur1:    .asciz "Erreur fermeture fichier.\n"
+szMessErreur2:    .asciz "Erreur lecture fichier.\n"
+szCarriageReturn: .asciz "\n"
+szMessEndLine:    .asciz "<<<<<< End line.\n"
+
+szMessCodeErr: .asciz "Error code décimal :  @ \n"
+
+szNameFileInput:    .asciz "input.txt"
+
+/*******************************************/
+/* DONNEES NON INITIALISEES                */
+/*******************************************/
+.bss
+sZoneConv:    .skip 24
+sBuffer:      .skip BUFSIZE
+sBufferWord:  .skip LINESIZE
+/**********************************************/
+/* -- Code section                            */
+/**********************************************/
+.text
+.global main
+main:
+    /* open file */
+    mov x0,AT_FDCWD
+    ldr x1,qAdrszNameFileInput     // file name
+    mov x2,O_RDONLY                //  flags
+    mov x3,0                       // mode
+    mov x8,OPEN                    // call system OPEN
+    svc 0
+    cmp x0,0                       // open error ?
+    ble erreur
+    /* read file  */
+    mov x9,x0                      // save File Descriptor
+    ldr x1,qAdrsBuffer             // buffer address
+    mov x2,BUFSIZE                 // buffer size
+    mov x8,READ                    // call system  READ
+    svc 0
+    cmp x0,0                       // read error ?
+    ble erreur2
+    mov x2,x0                      // length read characters
+    /* buffer analyze   */
+    ldr x3,qAdrsBuffer             // buffer address
+    ldr x5,qAdrsBufferWord         // buffer address
+    mov x7,0                       // word byte counter
+    mov x4,0                       // byte counter
+    mov x10,1
+1:
+    ldrb w6,[x3,x4]                // load byte buffer
+    cmp x6,' '                     // space ?
+    csel x8,xzr,x10,eq             // yes  0-> x8
+    beq 2f
+    cmp x6,0xA                     // end line ?
+    csel x8,x10,xzr,eq             // yes 1 -> x8
+    beq 2f
+    cmp x6,0xD                     // end line ?
+    csel x8,x10,xzr,eq
+    beq 3f
+    strb w6,[x5,x7]                // store byte
+    add x7,x7,1                    // increment word byte counter
+    b 4f
+2:                                 // word end
+    cmp x7,0
+    beq 3f
+    mov x6,0                       // store 0 final
+    strb w6,[x5,x7]
+    mov x0,x5                      // display word
+    bl affichageMess
+    ldr x0,qAdrszCarriageReturn
+    bl affichageMess
+    mov x7,0                       // raz word byte counter
+3:
+    cmp x8,1                       // end line ?
+    bne 4f
+    ldr x0,qAdrszMessEndLine
+    bl affichageMess
+4:
+    add x4,x4,1                    // increment read buffer counter
+    cmp x4,x2                      // end bytes ?
+    blt 1b                         // no -> loop
+
+4:
+    /* close imput file */
+    mov x0,x9                      // Fd
+    mov x8,CLOSE                   // call system CLOSE
+    svc 0
+    cmp x0,0                       // close error ?
+    blt erreur1
+
+    mov x0,0                       // return code OK
+    b 100f
+erreur:
+    ldr x1,qAdrszMessErreur
+    bl displayError
+    mov x0,1                       // error return code
+    b 100f
+erreur1:
+    ldr x1,qAdrszMessErreur1
+    bl displayError
+    mov x0,1                      // error return code
+    b 100f
+erreur2:
+    ldr x1,qAdrszMessErreur2
+    bl displayError
+    mov x0,1                      // error return code
+    b 100f
+
+100:                              // end program
+    mov x8,EXIT
+    svc 0
+qAdrszNameFileInput:      .quad szNameFileInput
+qAdrszMessErreur:         .quad szMessErreur
+qAdrszMessErreur1:        .quad szMessErreur1
+qAdrszMessErreur2:        .quad szMessErreur2
+qAdrszCarriageReturn:     .quad szCarriageReturn
+qAdrszMessEndLine:        .quad szMessEndLine
+qAdrsBuffer:              .quad sBuffer
+qAdrsBufferWord:          .quad sBufferWord
+/******************************************************************/
+/*     display error message                                      */
+/******************************************************************/
+/* x0 contains error code */
+/* x1 contains address error message    */
+displayError:
+    stp x2,lr,[sp,-16]!            // save  registers
+    mov x2,x0                      // save error code
+    mov x0,x1                      // display message error
+    bl affichageMess
+    mov x0,x2
+    ldr x1,qAdrsZoneConv           // conversion error code
+    bl conversion10S               // decimal conversion
+    ldr x0,qAdrszMessCodeErr
+    ldr x1,qAdrsZoneConv
+    bl strInsertAtCharInc          // insert result at @ character
+    bl affichageMess               // display message final
+    ldp x2,lr,[sp],16              // restaur  2 registers
+    ret                            // return to address lr x30
+qAdrsZoneConv:        .quad sZoneConv
+qAdrszMessCodeErr:    .quad szMessCodeErr
+/********************************************************/
+/*        File Include fonctions                        */
+/********************************************************/
+/* for this file see task include a file in language AArch64 assembly */
+.include "../includeARM64.inc"

Task/Input-loop/ALGOL-68/input-loop-1.alg

@@ -0,0 +1,11 @@
+main:(
+  PROC raise logical file end = (REF FILE f) BOOL: ( except logical file end );
+  on logical file end(stand in, raise logical file end);
+  DO
+    print(read string);
+    read(new line);
+    print(new line)
+  OD;
+  except logical file end:
+    SKIP
+)

Task/Input-loop/ALGOL-68/input-loop-2.alg

@@ -0,0 +1,18 @@
+main:(
+  PROC raise logical file end = (REF FILE f) BOOL: ( except logical file end );
+  on logical file end(stand in, raise logical file end);
+  DO
+    PROC raise page end = (REF FILE f) BOOL: ( except page end );
+    on page end(stand in, raise page end);
+    DO
+      print(read string);
+      read(new line);
+      print(new line)
+    OD;
+    except page end:
+      read(new page);
+      print(new page)
+  OD;
+  except logical file end:
+    SKIP
+)

Task/Input-loop/ALGOL-W/input-loop.alg

@@ -0,0 +1,12 @@
+begin
+    string(80) line;
+    % allow the program to continue after reaching end-of-file %
+    % without this, end-of-file would cause a run-time error   %
+    ENDFILE := EXCEPTION( false, 1, 0, false, "EOF" );
+    % read lines until end of file                             %
+    read( line );
+    while not XCPNOTED(ENDFILE) do begin
+        write( line );
+        read(  line )
+    end
+end.

Task/Input-loop/APL/input-loop.apl

@@ -0,0 +1,14 @@
+      h ← ⊃ (⎕fio['read_text'] 'corpus/sample1.txt')
+      ⍴h
+7 49
+      ]boxing 8
+      h
+┌→────────────────────────────────────────────────┐
+↓This is some sample text.                        │
+│The text itself has multiple lines, and          │
+│the text has some words that occur multiple times│
+│in the text.                                     │
+│                                                 │
+│This is the end of the text.                     │
+│                                                 │
+└─────────────────────────────────────────────────┘

Task/Input-loop/ARM-Assembly/input-loop.arm

@@ -0,0 +1,146 @@
+/* ARM assembly Raspberry PI  */
+/*  program inputLoop.s   */
+
+/* REMARK 1 : this program use routines in a include file
+   see task Include a file language arm assembly
+   for the routine affichageMess conversion10
+   see at end of this program the instruction include */
+
+/*********************************************/
+/*constantes                                */
+/********************************************/
+.equ STDOUT, 1     @ Linux output console
+.equ EXIT,   1     @ Linux syscall
+.equ READ,   3
+.equ WRITE,  4
+.equ OPEN,   5
+.equ CLOSE,  6
+.equ CREATE,  8
+/*  file */
+.equ O_RDONLY,    0x0        @ open for reading only
+
+.equ BUFSIZE,  10000
+.equ LINESIZE, 100
+
+/*********************************/
+/* Initialized data              */
+/*********************************/
+.data
+szMessErreur:     .asciz "Erreur ouverture fichier input.\n"
+szMessErreur1:    .asciz "Erreur fermeture fichier.\n"
+szMessErreur2:    .asciz "Erreur lecture fichier.\n"
+szCarriageReturn: .asciz "\n"
+szMessEndLine:    .asciz "<<<<<< End line.\n"
+
+szNameFileInput:    .asciz "input.txt"
+
+/*******************************************/
+/* DONNEES NON INITIALISEES                */
+/*******************************************/
+.bss
+sBuffer:      .skip BUFSIZE
+sBufferWord:  .skip LINESIZE
+/**********************************************/
+/* -- Code section                            */
+/**********************************************/
+.text
+.global main
+main:
+    /* open file */
+    ldr r0,iAdrszNameFileInput      @ file name
+    mov r1,#O_RDONLY                @  flags
+    mov r2,#0                       @ mode
+    mov r7,#OPEN                    @ call system OPEN
+    svc #0
+    cmp r0,#0                       @ open error ?
+    ble erreur
+    /* read file  */
+    mov r9,r0                       @ save File Descriptor
+    ldr r1,iAdrsBuffer              @ buffer address
+    mov r2,#BUFSIZE                 @ buffer size
+    mov r7, #READ                   @ call system  READ
+    svc 0
+    cmp r0,#0                       @ read error ?
+    ble erreur2
+    mov r2,r0                       @ length read characters
+    /* buffer analyze   */
+    ldr r3,iAdrsBuffer              @ buffer address
+    ldr r5,iAdrsBufferWord          @ buffer address
+    mov r7,#0                       @ word byte counter
+    mov r4,#0                       @ byte counter
+1:
+    ldrb r6,[r3,r4]                 @ load byte buffer
+    cmp r6,#' '                     @ space ?
+    moveq r8,#0                     @ yes
+    beq 2f
+    cmp r6,#0xA                     @ end line ?
+    moveq r8,#1
+    beq 2f
+    cmp r6,#0xD                     @ end line ?
+    beq 3f
+    strb r6,[r5,r7]                 @ store byte
+    add r7,#1                       @ increment word byte counter
+    b 4f
+2:                                  @ word end
+    cmp r7,#0
+    beq 3f
+    mov r6,#0                       @ store 0 final
+    strb r6,[r5,r7]
+    mov r0,r5                       @ display word
+    bl affichageMess
+    ldr r0,iAdrszCarriageReturn
+    bl affichageMess
+    mov r7,#0                       @ raz word byte counter
+3:
+    cmp r8,#1                       @ end line ?
+    bne 4f
+    ldr r0,iAdrszMessEndLine
+    bl affichageMess
+4:
+    add r4,#1                       @ increment read buffer counter
+    cmp r4,r2                       @ end bytes ?
+    blt 1b                          @ no -> loop
+
+4:
+    /* close imput file */
+    mov r0,r9                       @ Fd
+    mov r7, #CLOSE                  @ call system CLOSE
+    svc 0
+    cmp r0,#0                       @ close error ?
+    blt erreur1
+
+
+    mov r0,#0     @ return code OK
+    b 100f
+erreur:
+    ldr r1,iAdrszMessErreur
+    bl displayError
+    mov r0,#1       @ error return code
+    b 100f
+erreur1:
+    ldr r1,iAdrszMessErreur1
+    bl displayError
+    mov r0,#1       @ error return code
+    b 100f
+erreur2:
+    ldr r1,iAdrszMessErreur2
+    bl displayError
+    mov r0,#1       @ error return code
+    b 100f
+
+
+100:        @ end program
+    mov r7, #EXIT
+    svc 0
+iAdrszNameFileInput:      .int szNameFileInput
+iAdrszMessErreur:         .int szMessErreur
+iAdrszMessErreur1:        .int szMessErreur1
+iAdrszMessErreur2:        .int szMessErreur2
+iAdrszCarriageReturn:     .int szCarriageReturn
+iAdrszMessEndLine:        .int szMessEndLine
+iAdrsBuffer:              .int sBuffer
+iAdrsBufferWord:          .int sBufferWord
+/***************************************************/
+/*      ROUTINES INCLUDE                           */
+/***************************************************/
+.include "../affichage.inc"

Task/Input-loop/AWK/input-loop-1.awk

@@ -0,0 +1 @@
+{ print $0 }

Task/Input-loop/AWK/input-loop-2.awk

@@ -0,0 +1 @@
+1

Task/Input-loop/Action-/input-loop.action

@@ -0,0 +1,19 @@
+PROC ReadStream(BYTE stream)
+  CHAR ARRAY line(255)
+
+  WHILE Eof(stream)=0
+  DO
+    InputSD(stream,line)
+    PrintE(line)
+  OD
+RETURN
+
+PROC Main()
+  BYTE streamId=[1]
+
+  Close(streamId)
+  Open(streamId,"H6:INPUT_PU.ACT",4)
+  PrintE("Reading from stream...") PutE()
+  ReadStream(streamId)
+  Close(streamId)
+RETURN

Task/Input-loop/Ada/input-loop.ada

@@ -0,0 +1,18 @@
+with Ada.Text_Io; use Ada.Text_Io;
+
+procedure Read_Stream is
+   Line : String(1..10);
+   Length : Natural;
+begin
+   while not End_Of_File loop
+      Get_Line(Line, Length); -- read up to 10 characters at a time
+      Put(Line(1..Length));
+      -- The current line of input data may be longer than the string receiving the data.
+      -- If so, the current input file column number will be greater than 0
+      -- and the extra data will be unread until the next iteration.
+      -- If not, we have read past an end of line marker and col will be 1
+      if Col(Current_Input) = 1 then
+         New_Line;
+      end if;
+   end loop;
+end Read_Stream;

Task/Input-loop/Aime/input-loop.aime

@@ -0,0 +1,9 @@
+void
+read_stream(file f)
+{
+    text s;
+
+    while (f_line(f, s) != -1) {
+        # the read line available as -s-
+    }
+}

Task/Input-loop/AmigaE/input-loop.amiga

@@ -0,0 +1,26 @@
+CONST BUFLEN=1024, EOF=-1
+
+PROC consume_input(fh)
+  DEF buf[BUFLEN] : STRING, r
+  REPEAT
+    /* even if the line si longer than BUFLEN,
+       ReadStr won't overflow; rather the line is
+       "splitted" and the remaining part is read in
+       the next ReadStr */
+    r := ReadStr(fh, buf)
+    IF buf[] OR (r <> EOF)
+      -> do something
+      WriteF('\s\n',buf)
+    ENDIF
+  UNTIL r=EOF
+ENDPROC
+
+PROC main()
+  DEF fh
+
+  fh := Open('basicinputloop.e', OLDFILE)
+  IF fh
+    consume_input(fh)
+    Close(fh)
+  ENDIF
+ENDPROC

Task/Input-loop/Applesoft-BASIC/input-loop.basic

@@ -0,0 +1,14 @@
+100 INPUT "FILENAME:";F$
+110 D$ = CHR$(4)
+120 PRINT D$"VERIFY"F$
+130 PRINT D$"OPEN"F$
+140 PRINT D$"READ"F$
+150 ONERR GOTO 190
+
+160 GET C$
+170 PRINT CHR$(0)C$;
+180 GOTO 160
+
+190 POKE 216,0
+200 IF PEEK(222) <> 5 THEN RESUME
+210 PRINT D$"CLOSE"F$

Task/Input-loop/Arturo/input-loop.arturo

@@ -0,0 +1,4 @@
+while [true][
+    i: input "> "
+    print i
+]

Task/Input-loop/AutoHotkey/input-loop.ahk

@@ -0,0 +1,4 @@
+Loop, Read, Input.txt, Output.txt
+{
+   FileAppend, %A_LoopReadLine%`n
+}

Task/Input-loop/BASIC256/input-loop.basic

@@ -0,0 +1,9 @@
+f = freefile
+open f, "test.txt"
+
+while not eof(f)
+	linea$ = readline(f)
+	print linea$	# echo to the console
+end while
+close f
+end

Task/Input-loop/BBC-BASIC/input-loop.basic

@@ -0,0 +1,11 @@
+      STD_INPUT_HANDLE = -10
+      STD_OUTPUT_HANDLE = -11
+      SYS "GetStdHandle", STD_INPUT_HANDLE TO @hfile%(1)
+      SYS "GetStdHandle", STD_OUTPUT_HANDLE TO @hfile%(2)
+      SYS "SetConsoleMode", @hfile%(1), 0
+      *INPUT 13
+      *OUTPUT 14
+      REPEAT
+        INPUT A$
+        PRINT A$
+      UNTIL FALSE

Task/Input-loop/BaCon/input-loop.bacon

@@ -0,0 +1,13 @@
+'--- some generic header file to give it a real test
+PRINT "Enter any file name you want to read  ex: /usr/include/X11/X.h"
+INPUT filename$
+
+text$  = LOAD$(filename$)
+SPLIT text$ BY NL$ TO TOK$ SIZE dim
+i = 0
+
+'---dynamic index  the end of an array is always null terminated
+	WHILE (TOK$[i] ISNOT NULL)
+		PRINT TOK$[i]
+		INCR i
+	WEND

Task/Input-loop/Batch-File/input-loop.bat

@@ -0,0 +1 @@
+for /f %%i in (file.txt) do if %%i@ neq @ echo %%i

Task/Input-loop/Bracmat/input-loop.bracmat

@@ -0,0 +1,27 @@
+( put$("This is
+a three line
+text","test.txt",NEW)
+& fil$("test.txt",r)
+& fil$(,STR," \t\r\n")
+& 0:?linenr
+&   whl
+  ' ( fil$:(?line.?breakchar)
+    &   put
+      $ ( str
+        $ ( "breakchar:"
+            ( !breakchar:" "&SP
+            | !breakchar:\t&"\\t"
+            | !breakchar:\r&"\\r"
+            | !breakchar:\n&"\\n"
+            | !breakchar:&EOF
+            )
+            ", word "
+            (1+!linenr:?linenr)
+            ":"
+            !line
+            \n
+          )
+        )
+    )
+& (fil$(,SET,-1)|out$"file closed")
+);

Task/Input-loop/C++/input-loop-1.cpp

@@ -0,0 +1,43 @@
+#include <istream>
+#include <string>
+#include <vector>
+#include <algorithm>
+#include <iostream>
+#include <iterator>
+
+// word by word
+template<class OutIt>
+void read_words(std::istream& is, OutIt dest)
+{
+  std::string word;
+  while (is >> word)
+  {
+    // send the word to the output iterator
+    *dest = word;
+  }
+}
+
+// line by line:
+template<class OutIt>
+void read_lines(std::istream& is, OutIt dest)
+{
+  std::string line;
+  while (std::getline(is, line))
+  {
+    // store the line to the output iterator
+    *dest = line;
+  }
+}
+
+int main()
+{
+  // 1) sending words from std. in std. out (end with Return)
+  read_words(std::cin,
+             std::ostream_iterator<std::string>(std::cout, " "));
+
+  // 2) appending lines from std. to vector (end with Ctrl+Z)
+  std::vector<std::string> v;
+  read_lines(std::cin, std::back_inserter(v));
+
+  return 0;
+}

Task/Input-loop/C++/input-loop-2.cpp

@@ -0,0 +1,26 @@
+template<class OutIt>
+void read_words(std::istream& is, OutIt dest)
+{
+    typedef std::istream_iterator<std::string> InIt;
+    std::copy(InIt(is), InIt(),
+              dest);
+}
+
+namespace detail
+{
+    struct ReadableLine : public std::string
+    {
+        friend std::istream & operator>>(std::istream & is, ReadableLine & line)
+        {
+            return std::getline(is, line);
+        }
+    };
+}
+
+template<class OutIt>
+void read_lines(std::istream& is, OutIt dest)
+{
+    typedef std::istream_iterator<detail::ReadableLine> InIt;
+    std::copy(InIt(is), InIt(),
+              dest);
+}

Task/Input-loop/C-sharp/input-loop.cs

@@ -0,0 +1,18 @@
+using System;
+using System.IO;
+
+class Program
+{
+    static void Main(string[] args)
+    {
+        // For stdin, you could use
+        // new StreamReader(Console.OpenStandardInput(), Console.InputEncoding)
+
+        using (var b = new StreamReader("file.txt"))
+        {
+            string line;
+            while ((line = b.ReadLine()) != null)
+                Console.WriteLine(line);
+        }
+    }
+}

Task/Input-loop/C/input-loop.c

@@ -0,0 +1,32 @@
+#include <stdlib.h>
+#include <stdio.h>
+
+char *get_line(FILE* fp)
+{
+	int len = 0, got = 0, c;
+	char *buf = 0;
+
+	while ((c = fgetc(fp)) != EOF) {
+		if (got + 1 >= len) {
+			len *= 2;
+			if (len < 4) len = 4;
+			buf = realloc(buf, len);
+		}
+		buf[got++] = c;
+		if (c == '\n') break;
+	}
+	if (c == EOF && !got) return 0;
+
+	buf[got++] = '\0';
+	return buf;
+}
+
+int main()
+{
+	char *s;
+	while ((s = get_line(stdin))) {
+		printf("%s",s);
+		free(s);
+	}
+	return 0;
+}

Task/Input-loop/COBOL/input-loop.cobol

@@ -0,0 +1,33 @@
+       IDENTIFICATION DIVISION.
+       PROGRAM-ID. input-loop.
+
+       ENVIRONMENT DIVISION.
+       INPUT-OUTPUT SECTION.
+       FILE-CONTROL.
+           SELECT in-stream ASSIGN TO KEYBOARD *> or any other file/stream
+               ORGANIZATION LINE SEQUENTIAL
+               FILE STATUS in-stream-status.
+
+       DATA DIVISION.
+       FILE SECTION.
+       FD  in-stream.
+       01  stream-line                 PIC X(80).
+
+       WORKING-STORAGE SECTION.
+       01  in-stream-status            PIC 99.
+           88  end-of-stream           VALUE 10.
+
+       PROCEDURE DIVISION.
+           OPEN INPUT in-stream
+
+           PERFORM UNTIL EXIT
+               READ in-stream
+                   AT END
+                       EXIT PERFORM
+               END-READ
+               DISPLAY stream-line
+           END-PERFORM
+
+           CLOSE in-stream
+           .
+       END PROGRAM input-loop.

Task/Input-loop/Clojure/input-loop.clj

@@ -0,0 +1,2 @@
+(defn basic-input [fname]
+  (line-seq (java.io.BufferedReader. (java.io.FileReader. fname))))

Task/Input-loop/Commodore-BASIC/input-loop.basic

@@ -0,0 +1,25 @@
+10 rem input loop - rosetta code
+11 rem open command channel, clear screen, switch to lower case
+12 open 15,8,15
+15 print chr$(147);chr$(14):f$=""
+
+20 input "Enter filename";f$
+25 if f$="" then end
+
+30 open 5,8,5,f$+",s,r"
+40 gosub 1000
+50 if er=62 then print "That file is not found... Try again.":close 5:goto 20
+60 if er<>0 then print "There was an unexpected error.":close 5:gosub 1100
+
+70 get#5,a$
+80 if st and 64 then close 5:close 15:end
+90 print a$;:goto 70
+
+1000 rem check command channel for error
+1005 rem error number, error msg$, track number, sector number
+1010 input#15,er,er$,tk,sc
+1020 return
+
+1100 rem print error
+1110 print:print er;"- ";er$;" track:";tk;"sector:";sc
+1120 return

Task/Input-loop/Common-Lisp/input-loop.lisp

@@ -0,0 +1,5 @@
+(defun basic-input (filename)
+    (with-open-file (stream (make-pathname :name filename) :direction :input)
+        (loop for line = (read-line stream nil nil)
+            while line
+            do (format t "~a~%" line))))

Task/Input-loop/D/input-loop-1.d

@@ -0,0 +1,23 @@
+void main() {
+    import std.stdio;
+
+    immutable fileName = "input_loop1.d";
+
+    foreach (const line; fileName.File.byLine) {
+        pragma(msg, typeof(line)); // Prints: const(char[])
+        // line is a transient slice, so if you need to
+        // retain it for later use, you have to .dup or .idup it.
+        line.writeln; // Do something with each line.
+    }
+
+    // Keeping the line terminators:
+    foreach (const line; fileName.File.byLine(KeepTerminator.yes)) {
+        // line is a transient slice.
+        line.writeln;
+    }
+
+    foreach (const string line; fileName.File.lines) {
+        // line is a transient slice.
+        line.writeln;
+    }
+}

Task/Input-loop/D/input-loop-2.d

@@ -0,0 +1,8 @@
+import tango.io.Console;
+import tango.text.stream.LineIterator;
+
+void main (char[][] args) {
+    foreach (line; new LineIterator!(char)(Cin.input)) {
+        // do something with each line
+    }
+}

Task/Input-loop/D/input-loop-3.d

@@ -0,0 +1,8 @@
+import tango.io.Console;
+import tango.text.stream.SimpleIterator;
+
+void main (char[][] args) {
+    foreach (word; new SimpleIterator!(char)(" ", Cin.input)) {
+        // do something with each word
+    }
+}

Task/Input-loop/Delphi/input-loop.delphi

@@ -0,0 +1,17 @@
+program InputLoop;
+
+{$APPTYPE CONSOLE}
+
+uses SysUtils, Classes;
+
+var
+  lReader: TStreamReader; // Introduced in Delphi XE
+begin
+  lReader := TStreamReader.Create('input.txt', TEncoding.Default);
+  try
+    while lReader.Peek >= 0 do
+      Writeln(lReader.ReadLine);
+  finally
+    lReader.Free;
+  end;
+end.

Task/Input-loop/EasyLang/input-loop.easy

@@ -0,0 +1,5 @@
+repeat
+  l$ = input
+  until error = 1
+  print l$
+.

Task/Input-loop/Eiffel/input-loop.e

@@ -0,0 +1,236 @@
+note
+	description : "{
+There are several examples included, including input from a text file,
+simple console input and input from standard input explicitly.
+See notes in the code for details.
+
+Examples were compile using Eiffel Studio 6.6 with only the default
+class libraries.
+}"
+
+class APPLICATION
+
+create
+	make
+
+feature
+
+	make
+		do
+			-- These examples show non-console input (a plain text file)
+			-- with end-of-input handling.
+			read_lines_from_file
+			read_words_from_file
+
+			-- These examples use simplified input from 'io', that
+			-- handles the details of whether it's stdin or not
+			-- They terminate on a line (word) of "q"
+			read_lines_from_console_with_termination
+			read_words_from_console_with_termination
+
+			-- The next examples show reading stdin explicitly
+			-- as if it were a text file.  It expects and end of file
+			-- termination and so will loop indefinitely unless reading
+			-- from a pipe or your console can send an EOF.
+			read_lines_from_stdin
+			read_words_from_stdin
+
+			-- These examples use simplified input from 'io', that
+			-- handles the details of whether it's stdin or not,
+			-- but have no explicit termination
+			read_lines_from_console_forever
+			read_words_from_console_forever
+		end
+
+	--|--------------------------------------------------------------
+
+	read_lines_from_file
+			-- Read input from a text file
+			-- Echo each line of the file to standard output.
+			--
+			-- Some language examples omit file open/close operations
+			-- but are included here for completeness.  Additional error
+			-- checking would be appropriate in production code.
+		local
+			tf: PLAIN_TEXT_FILE
+		do
+			print ("Reading lines from a file%N")
+			create tf.make ("myfile") -- Create a file object
+			tf.open_read -- Open the file in read mode
+
+			-- The actual input loop
+
+			from
+			until tf.end_of_file
+			loop
+				tf.read_line
+				print (tf.last_string + "%N")
+			end
+
+			tf.close -- Close the file
+		end
+
+	--|--------------------------------------------------------------
+
+	read_words_from_file
+			-- Read input from a text file
+			-- Echo each word of the file to standard output on a
+			-- separate line.
+			--
+			-- Some language examples omit file open/close operations
+			-- but are included here for completeness.  Additional error
+			-- checking would be appropriate in production code.
+		local
+			tf: PLAIN_TEXT_FILE
+		do
+			print ("Reading words from a file%N")
+			create tf.make ("myfile") -- Create a file object
+			tf.open_read -- Open the file in read mode
+
+			-- The actual input loop
+
+			from
+			until tf.end_of_file
+			loop
+				-- This instruction is the only difference between this
+				-- example and the read_lines_from_file example
+				tf.read_word
+				print (tf.last_string + "%N")
+			end
+
+			tf.close -- Close the file
+		end
+
+	--|--------------------------------------------------------------
+
+	read_lines_from_console_with_termination
+			-- Read lines from console and echo them back to output
+			-- until the line contains only the termination key 'q'
+			--
+			-- 'io' is acquired through inheritance from class ANY,
+			-- the top of all inheritance hierarchies.
+		local
+			the_cows_come_home: BOOLEAN
+		do
+			print ("Reading lines from console%N")
+			from
+			until the_cows_come_home
+			loop
+				io.read_line
+				if io.last_string ~ "q" then
+					the_cows_come_home := True
+					print ("Mooooo!%N")
+				else
+					print (io.last_string)
+					io.new_line
+				end
+			end
+		end
+
+	--|--------------------------------------------------------------
+
+	read_words_from_console_with_termination
+			-- Read words from console and echo them back to output, one
+			-- word per line, until the line contains only the
+			-- termination key 'q'
+			--
+			-- 'io' is acquired through inheritance from class ANY,
+			-- the top of all inheritance hierarchies.
+		local
+			the_cows_come_home: BOOLEAN
+		do
+			print ("Reading words from console%N")
+			from
+			until the_cows_come_home
+			loop
+				io.read_word
+				if io.last_string ~ "q" then
+					the_cows_come_home := True
+					print ("Mooooo!%N")
+				else
+					print (io.last_string)
+					io.new_line
+				end
+			end
+		end
+
+	--|--------------------------------------------------------------
+
+	read_lines_from_console_forever
+			-- Read lines from console and echo them back to output
+			-- until the program is terminated externally
+			--
+			-- 'io' is acquired through inheritance from class ANY,
+			-- the top of all inheritance hierarchies.
+		do
+			print ("Reading lines from console (no termination)%N")
+			from
+			until False
+			loop
+				io.read_line
+				print (io.last_string + "%N")
+			end
+		end
+
+	--|--------------------------------------------------------------
+
+	read_words_from_console_forever
+			-- Read words from console and echo them back to output, one
+			-- word per line until the program is terminated externally
+			--
+			-- 'io' is acquired through inheritance from class ANY,
+			-- the top of all inheritance hierarchies.
+		do
+			print ("Reading words from console (no termination)%N")
+			from
+			until False
+			loop
+				io.read_word
+				print (io.last_string + "%N")
+			end
+		end
+
+	--|--------------------------------------------------------------
+
+	read_lines_from_stdin
+			-- Read input from a stream on standard input
+			-- Echo each line of the file to standard output.
+			-- Note that we treat standard input as if it were a plain
+			-- text file
+		local
+			tf: PLAIN_TEXT_FILE
+		do
+			print ("Reading lines from stdin (EOF termination)%N")
+			tf := io.input
+
+			from
+			until tf.end_of_file
+			loop
+				tf.read_line
+				print (tf.last_string + "%N")
+			end
+		end
+
+	--|--------------------------------------------------------------
+
+	read_words_from_stdin
+			-- Read input from a stream on standard input
+			-- Echo each word of the file to standard output on a new
+			-- line
+			-- Note that we treat standard input as if it were a plain
+			-- text file
+		local
+			tf: PLAIN_TEXT_FILE
+		do
+			print ("Reading words from stdin (EOF termination)%N")
+			tf := io.input
+
+			from
+			until tf.end_of_file
+			loop
+				tf.read_line
+				print (tf.last_string + "%N")
+			end
+		end
+
+end

Task/Input-loop/Elena/input-loop-1.elena

@@ -0,0 +1,8 @@
+import system'routines;
+import system'io;
+import extensions'routines;
+
+public program()
+{
+    ReaderEnumerator.new(File.assign:"file.txt").forEach(printingLn)
+}

Task/Input-loop/Elena/input-loop-2.elena

@@ -0,0 +1,12 @@
+import system'io;
+
+public program()
+{
+    using(var reader := File.assign:"file.txt".textreader())
+    {
+        while (reader.Available)
+        {
+           console.writeLine(reader.readLine())
+        }
+    }
+}

Task/Input-loop/Elixir/input-loop.elixir

@@ -0,0 +1,12 @@
+defmodule RC do
+  def input_loop(stream) do
+    case IO.read(stream, :line) do
+      :eof -> :ok
+      data -> IO.write data
+              input_loop(stream)
+    end
+  end
+end
+
+path = hd(System.argv)
+File.open!(path, [:read], fn stream -> RC.input_loop(stream) end)

Task/Input-loop/Erlang/input-loop.erl

@@ -0,0 +1,8 @@
+% Implemented by Arjun Sunel
+-module(read_files).
+-export([main/0]).
+
+main() ->
+	Read = fun (Filename) -> {ok, Data} = file:read_file(Filename), Data end,
+	Lines = string:tokens(binary_to_list(Read("read_files.erl")), "\n"),
+	lists:foreach(fun (Y) -> io:format("~s~n", [Y]) end, lists:zipwith(fun(X,_)->X end, Lines, lists:seq(1, length(Lines)))).

Task/Input-loop/Euphoria/input-loop.euphoria

@@ -0,0 +1,10 @@
+procedure process_line_by_line(integer fn)
+    object line
+    while 1 do
+        line = gets(fn)
+        if atom(line) then
+            exit
+        end if
+        -- process the line
+    end while
+end procedure

Task/Input-loop/F-Sharp/input-loop.fs

@@ -0,0 +1,5 @@
+let lines_of_file file =
+  seq { use stream = System.IO.File.OpenRead file
+        use reader = new System.IO.StreamReader(stream)
+        while not reader.EndOfStream do
+          yield reader.ReadLine() }

Task/Input-loop/Factor/input-loop.factor

@@ -0,0 +1 @@
+"file.txt" utf8 [ [ process-line ] each-line ] with-file-reader

Task/Input-loop/Fantom/input-loop.fantom

@@ -0,0 +1,26 @@
+class Main
+{
+  public static Void main ()
+  {
+    // example of reading by line
+    str := "first\nsecond\nthird\nword"
+    inputStream := str.in
+
+    inputStream.eachLine |Str line|
+    {
+      echo ("Line is: $line")
+    }
+
+    // example of reading by word
+    str = "first second third word"
+    inputStream = str.in
+
+    word := inputStream.readStrToken // reads up to but excluding next space
+    while (word != null)
+    {
+      echo ("Word: $word")
+      inputStream.readChar // skip over the preceding space!
+      word = inputStream.readStrToken
+    }
+  }
+}

Task/Input-loop/Forth/input-loop.fth

@@ -0,0 +1,6 @@
+4096 constant max-line
+: read-lines
+  begin  stdin pad max-line read-line throw
+  while  pad swap   \ addr len is the line of data, excluding newline
+         2drop
+  repeat ;

Task/Input-loop/Fortran/input-loop.f

@@ -0,0 +1,20 @@
+program BasicInputLoop
+
+  implicit none
+
+  integer, parameter        :: in = 50, &
+                               linelen = 1000
+  integer                   :: ecode
+  character(len=linelen)    :: l
+
+  open(in, file="afile.txt", action="read", status="old", iostat=ecode)
+  if ( ecode == 0 ) then
+     do
+        read(in, fmt="(A)", iostat=ecode) l
+        if ( ecode /= 0 ) exit
+        write(*,*) trim(l)
+     end do
+     close(in)
+  end if
+
+end program BasicInputLoop

Task/Input-loop/FreeBASIC/input-loop.basic

@@ -0,0 +1,14 @@
+' FB 1.05.0 Win64
+
+Dim line_ As String  ' line is a keyword
+Open "input.txt" For Input As #1
+
+While Not Eof(1)
+  Input #1, line_
+  Print line_  ' echo to the console
+Wend
+
+Close #1
+Print
+Print "Press any key to quit"
+Sleep

Task/Input-loop/Frink/input-loop.frink

@@ -0,0 +1,2 @@
+while (line = readStdin[]) != undef
+   println[line]

Task/Input-loop/FutureBasic/input-loop.basic

@@ -0,0 +1,20 @@
+include "NSLog.incl"
+
+local fn ReadTextFile
+  CFURLRef    url
+  CFStringRef string
+
+  url = openpanel 1, @"Select text file..."
+  if ( url )
+    string = fn StringWithContentsOfURL( url, NSUTF8StringEncoding, NULL )
+    if ( string )
+      NSLog(@"%@",string)
+    end if
+  else
+    // user cancelled
+  end if
+end fn
+
+fn ReadTextFile
+
+HandleEvents

Task/Input-loop/GDScript/input-loop.gd

@@ -0,0 +1,13 @@
+extends MainLoop
+
+
+func _process(_delta: float) -> bool:
+	while true:
+		# Read a line from stdin
+		var input: String = OS.read_string_from_stdin()
+
+		# Empty lines are "\n" whereas end of input will be completely empty.
+		if len(input) == 0:
+			break
+		printraw(input)
+	return true # Exit

Task/Input-loop/Gnuplot/input-loop.gnuplot

@@ -0,0 +1 @@
+!cat

Task/Input-loop/Go/input-loop-1.go

@@ -0,0 +1,26 @@
+package main
+
+import (
+	"bufio"
+	"io"
+	"log"
+	"os"
+)
+
+func main() {
+	in := bufio.NewReader(os.Stdin)
+	for {
+		s, err := in.ReadString('\n')
+		if err != nil {
+			// io.EOF is expected, anything else
+			// should be handled/reported
+			if err != io.EOF {
+				log.Fatal(err)
+			}
+			break
+		}
+		// Do something with the line of text
+		// in string variable s.
+		_ = s
+	}
+}

Task/Input-loop/Go/input-loop-2.go

@@ -0,0 +1,24 @@
+package main
+
+import (
+	"bufio"
+	"log"
+	"os"
+)
+
+func main() {
+	s := bufio.NewScanner(os.Stdin)
+	// Select the split function, other ones are available
+	// in bufio or you can provide your own.
+	s.Split(bufio.ScanWords)
+	for s.Scan() {
+		// Get and use the next 'token'
+		asBytes := s.Bytes() // Bytes does no alloaction
+		asString := s.Text() // Text returns a newly allocated string
+		_, _ = asBytes, asString
+	}
+	if err := s.Err(); err != nil {
+		// Handle/report any error (EOF will not be reported)
+		log.Fatal(err)
+	}
+}

Task/Input-loop/Groovy/input-loop.groovy

@@ -0,0 +1,5 @@
+def lineMap = [:]
+System.in.eachLine { line, i ->
+    lineMap[i] = line
+}
+lineMap.each { println it }

Task/Input-loop/Haskell/input-loop.hs

@@ -0,0 +1,11 @@
+import System.IO
+
+readLines :: Handle -> IO [String]
+readLines h = do
+  s <- hGetContents h
+  return $ lines s
+
+readWords :: Handle -> IO [String]
+readWords h = do
+  s <- hGetContents h
+  return $ words s

Task/Input-loop/HicEst/input-loop.hicest

@@ -0,0 +1,10 @@
+CHARACTER name='myfile.txt', string*1000
+
+   OPEN(FIle=name, OLD, LENgth=bytes, IOStat=errorcode, ERror=9)
+
+   DO line = 1, bytes  ! loop terminates with end-of-file error at the latest
+      READ(FIle=name, IOStat=errorcode, ERror=9) string
+      WRITE(StatusBar) string
+   ENDDO
+
+ 9 WRITE(Messagebox, Name) line, errorcode

Task/Input-loop/I/input-loop.i

@@ -0,0 +1,8 @@
+software {
+	loop {
+		read()
+		errors {
+			exit
+		}
+	}
+}

Task/Input-loop/IS-BASIC/input-loop-1.basic

@@ -0,0 +1,15 @@
+100 PROGRAM "Type.bas"
+110 TEXT 80
+120 INPUT PROMPT "File name: ":F$
+130 WHEN EXCEPTION USE IOERROR
+140   OPEN #1:F$ ACCESS INPUT
+150   DO
+160     LINE INPUT #1,IF MISSING EXIT DO:F$
+170     PRINT F$
+180   LOOP
+190   CLOSE #1
+200 END WHEN
+210 HANDLER IOERROR
+220   PRINT EXSTRING$(EXTYPE)
+230   END
+240 END HANDLER

Task/Input-loop/IS-BASIC/input-loop-2.basic

@@ -0,0 +1,11 @@
+100 PROGRAM "Type.bas"
+110 INPUT PROMPT "File name: ":F$
+120 WHEN EXCEPTION USE IOERROR
+130   OPEN #1:F$
+140   COPY FROM #1 TO #0
+150   CLOSE #1
+160 END WHEN
+170 HANDLER IOERROR
+180   PRINT EXSTRING$(EXTYPE)
+190   CLOSE #1
+200 END HANDLER

Task/Input-loop/Icon/input-loop.icon

@@ -0,0 +1,14 @@
+link str2toks
+# call either words or lines depending on what you want to do.
+procedure main()
+   words()
+end
+
+procedure lines()
+   while write(read())
+end
+
+procedure words()
+   local line
+   while line := read() do line ? every write(str2toks())
+end

Task/Input-loop/J/input-loop-1.j

@@ -0,0 +1,4 @@
+#!/usr/bin/ijconsole
+NB. read input until EOF
+((1!:1) 3)(1!:2) 4  NB. tested under j602
+exit ''

Task/Input-loop/J/input-loop-2.j

@@ -0,0 +1,10 @@
+$ ./read-input-to-eof.ijs <<EOF
+> abc
+> def
+> ghi
+> now is the time for all good men ...
+> EOF
+abc
+def
+ghi
+now is the time for all good men ...

Task/Input-loop/Java/input-loop-1.java

@@ -0,0 +1,25 @@
+import java.io.InputStream;
+import java.util.Scanner;
+
+public class InputLoop {
+    public static void main(String args[]) {
+        // To read from stdin:
+        InputStream source = System.in;
+
+        /*
+        Or, to read from a file:
+        InputStream source = new FileInputStream(filename);
+
+        Or, to read from a network stream:
+        InputStream source = socket.getInputStream();
+        */
+
+        Scanner in = new Scanner(source);
+        while(in.hasNext()){
+            String input = in.next(); // Use in.nextLine() for line-by-line reading
+
+            // Process the input here. For example, you could print it out:
+            System.out.println(input);
+        }
+    }
+}

Task/Input-loop/Java/input-loop-2.java

@@ -0,0 +1,31 @@
+import java.io.BufferedReader;
+import java.io.IOException;
+import java.io.InputStreamReader;
+import java.io.Reader;
+
+public class InputLoop {
+    public static void main(String args[]) {
+        // To read from stdin:
+        Reader reader = new InputStreamReader(System.in);
+
+        /*
+        Or, to read from a file:
+        Reader reader = new FileReader(filename);
+
+        Or, to read from a network stream:
+        Reader reader = new InputStreamReader(socket.getInputStream());
+        */
+
+        try {
+            BufferedReader inp = new BufferedReader(reader);
+            while(inp.ready()) {
+                int input = inp.read(); // Use in.readLine() for line-by-line
+
+                // Process the input here. For example, you can print it out.
+                System.out.println(input);
+            }
+        }  catch (IOException e) {
+            // There was an input error.
+        }
+    }
+}

Task/Input-loop/JavaScript/input-loop.js

@@ -0,0 +1,8 @@
+var text_stream = WScript.StdIn;
+var i = 0;
+
+while ( ! text_stream.AtEndOfStream ) {
+    var line = text_stream.ReadLine();
+    // do something with line
+    WScript.echo(++i + ": " + line);
+}

Task/Input-loop/Jq/input-loop-1.jq

@@ -0,0 +1 @@
+jq -r -R . FILENAME

Task/Input-loop/Jq/input-loop-2.jq

@@ -0,0 +1 @@
+jq . FILENAME

Task/Input-loop/Jsish/input-loop.jsish

@@ -0,0 +1,8 @@
+/* Input loop in Jsish */
+
+var line;
+var cs = 0, ls = 0;
+
+while (line = console.input()) { cs += line.length; ls += 1; }
+
+printf("%d lines, %d characters\n", ls, cs);

Task/Input-loop/Julia/input-loop.julia

@@ -0,0 +1,6 @@
+stream = IOBuffer("1\n2\n3\n4\n\n6")
+
+while !eof(stream)
+    line = readline(stream)
+    println(line)
+end

Task/Input-loop/Kotlin/input-loop.kotlin

@@ -0,0 +1,17 @@
+// version 1.1
+
+import java.util.*
+
+fun main(args: Array<String>) {
+    println("Keep entering text or the word 'quit' to end the program:")
+    val sc = Scanner(System.`in`)
+    val words = mutableListOf<String>()
+    while (true) {
+        val input: String = sc.next()
+        if (input.trim().toLowerCase() == "quit") {
+            if (words.size > 0) println("\nYou entered the following words:\n${words.joinToString("\n")}")
+            return
+        }
+        words.add(input)
+    }
+}

Task/Input-loop/LIL/input-loop.lil

@@ -0,0 +1,18 @@
+#
+# canread test (note that canread is not available in LIL/FPLIL itself
+# but provided by the command line interfaces in main.c/lil.pas)
+#
+# You can either call this and enter lines directly (use Ctrl+Z/Ctrl+D
+# to finish) or a redirect (e.g. lil canread.lil < somefile.txt)
+#
+# Normally this is how you are supposed to read multiple lines from
+# the standard input using the lil executable.  For an alternative way
+# that uses error catching via try see the eoferror.lil script.
+#
+
+set count 0
+while {[canread]} {
+    readline
+    inc count
+}
+print $count lines

Task/Input-loop/LSL/input-loop.lsl

@@ -0,0 +1,16 @@
+string sNOTECARD = "Input_Loop_Data_Source.txt";
+default {
+	integer iNotecardLine = 0;
+	state_entry() {
+		llOwnerSay("Reading '"+sNOTECARD+"'");
+		llGetNotecardLine(sNOTECARD, iNotecardLine);
+	}
+	dataserver(key kRequestId, string sData) {
+		if(sData==EOF) {
+			llOwnerSay("EOF");
+		} else {
+			llOwnerSay((string)iNotecardLine+": "+sData);
+			llGetNotecardLine(sNOTECARD, ++iNotecardLine);
+		}
+	}
+}

Task/Input-loop/Lang5/input-loop.lang5

@@ -0,0 +1,5 @@
+: read-lines do read . "\n" . eof if break then loop ;
+: ==>contents
+    '< swap open 'fh set fh fin read-lines fh close ;
+
+'file.txt ==>contents

Task/Input-loop/Lasso/input-loop.lasso

@@ -0,0 +1,10 @@
+local(
+	myfile		= file('//path/to/file.txt'),
+	textresult	= array
+)
+
+#myfile -> foreachline => {
+	#textresult -> insert(#1)
+}
+
+#textresult -> join('<br />')

Task/Input-loop/Liberty-BASIC/input-loop.basic

@@ -0,0 +1,9 @@
+filedialog "Open","*.txt",file$
+if file$="" then end
+open file$ for input as #f
+while not(eof(#f))
+    line input #f, t$
+    print t$
+wend
+close #f
+end

Task/Input-loop/Logo/input-loop.logo

@@ -0,0 +1 @@
+while [not eof?] [print readline]

Task/Input-loop/Lua/input-loop-1.lua

@@ -0,0 +1,6 @@
+lines = {}
+str = io.read()
+while str do
+    table.insert(lines,str)
+    str = io.read()
+end

Task/Input-loop/Lua/input-loop-2.lua

@@ -0,0 +1,5 @@
+lines = {}
+
+for line in io.lines() do
+    table.insert(lines, line) -- add the line to the list of lines
+end

Task/Input-loop/M2000-Interpreter/input-loop.m2000

@@ -0,0 +1,23 @@
+Document A$={1st Line
+      2nd line
+      3rd line
+      }
+Save.Doc A$, "test.txt", 0   ' 0 for utf16-le
+\\ we use Wide for utf16-le \\ without it we open using ANSI
+Open "test.txt" For Wide Input Exclusive as #N
+      While Not Eof(#N) {
+            Line Input #N, ThisLine$
+            Print ThisLine$
+      }
+Close #N
+Clear A$
+Load.Doc A$, "test.txt"
+\\ print proportional text, all lines
+Report A$
+\\ Print one line, non proportional
+\\ using paragraphs
+For i=0 to Doc.par(A$)-1
+      Print Paragraph$(A$, i)
+Next i
+\\ List of current variables (in any scope, public only)
+List

Task/Input-loop/MAXScript/input-loop.max

@@ -0,0 +1,10 @@
+fn ReadAFile FileName =
+(	
+	local in_file = openfile FileName
+	while not eof in_file do
+	(
+		--Do stuff in here--
+		print (readline in_file)
+	)
+	close in_file
+)

Task/Input-loop/MIRC-Scripting-Language/input-loop.mirc

@@ -0,0 +1,5 @@
+var %n = 1
+while (%n <= $lines(input.txt)) {
+  write output.txt $read(input.txt,%n)
+  inc %n
+}

Task/Input-loop/Maple/input-loop.maple

@@ -0,0 +1,9 @@
+readinput:=proc(filename)
+local line,file;
+file:="";
+line:=readline(filename);
+while line<>0 do
+line:=readline(filename);
+file:=cat(file,line);
+end do;
+end proc;

Task/Input-loop/Mathematica/input-loop.math

@@ -0,0 +1,3 @@
+stream = OpenRead["file.txt"];
+While[a != EndOfFile, Read[stream, Word]];
+Close[stream]

Task/Input-loop/Mercury/input-loop.mercury

@@ -0,0 +1,31 @@
+:- module input_loop.
+:- interface.
+
+:- import_module io.
+:- pred main(io::di, io::uo) is det.
+
+:- implementation.
+
+main(!IO) :-
+    io.stdin_stream(Stdin, !IO),
+    io.stdout_stream(Stdout, !IO),
+    read_and_print_lines(Stdin, Stdout, !IO).
+
+:- pred read_and_print_lines(io.text_input_stream::in,
+    io.text_output_stream::in, io::di, io::uo) is det.
+
+read_and_print_lines(InFile, OutFile, !IO) :-
+    io.read_line_as_string(InFile, Result, !IO),
+    (
+        Result = ok(Line),
+        io.write_string(OutFile, Line, !IO),
+        read_and_print_lines(InFile, OutFile, !IO)
+    ;
+        Result = eof
+    ;
+        Result = error(IOError),
+        Msg = io.error_message(IOError),
+        io.stderr_stream(Stderr, !IO),
+        io.write_string(Stderr, Msg, !IO),
+        io.set_exit_status(1, !IO)
+    ).

Task/Input-loop/Modula-2/input-loop.mod2

@@ -0,0 +1,23 @@
+PROCEDURE ReadName (VAR str : ARRAY OF CHAR);
+
+VAR     n               : CARDINAL;
+        ch, endch       : CHAR;
+
+BEGIN
+   REPEAT
+      InOut.Read (ch);
+      Exhausted := InOut.EOF ();
+      IF  Exhausted  THEN  RETURN  END
+   UNTIL  ch > ' ';             (* Eliminate whitespace         *)
+   IF  ch = '['  THEN  endch := ']'  ELSE  endch := ch  END;
+   n := 0;
+   REPEAT
+      InOut.Read (ch);
+      Exhausted := InOut.EOF ();
+      IF  Exhausted  THEN  RETURN  END;
+      IF  n <= HIGH (str)  THEN  str [n] := ch  ELSE  ch := endch  END;
+      INC (n)
+   UNTIL ch = endch;
+   IF  n <= HIGH (str)  THEN  str [n-1] := 0C  END;
+   lastCh := ch
+END ReadName;

Task/Input-loop/Modula-3/input-loop.mod3

@@ -0,0 +1,14 @@
+MODULE Output EXPORTS Main;
+
+IMPORT Rd, Wr, Stdio;
+
+VAR buf: TEXT;
+
+<*FATAL ANY*>
+
+BEGIN
+  WHILE NOT Rd.EOF(Stdio.stdin) DO
+    buf := Rd.GetLine(Stdio.stdin);
+    Wr.PutText(Stdio.stdout, buf);
+  END;
+END Output.

Task/Input-loop/NetRexx/input-loop-1.netrexx

@@ -0,0 +1,21 @@
+/* NetRexx */
+options replace format comments java crossref symbols nobinary
+
+-- Read from default input stream (console) until end of data
+lines = ''
+lines[0] = 0
+lineNo = 0
+
+loop label ioloop forever
+  inLine = ask
+  if inLine =  null  then leave ioloop -- stop on EOF (Try Ctrl-D on UNIX-like systems or Ctrl-Z on Windows)
+  lineNo = lineNo + 1
+  lines[0] = lineNo
+  lines[lineNo] = inLine
+  end ioloop
+
+loop l_ = 1 to lines[0]
+  say l_.right(4)':' lines[l_]
+  end l_
+
+return

Task/Input-loop/NetRexx/input-loop-2.netrexx

@@ -0,0 +1,20 @@
+/* NetRexx */
+options replace format comments java crossref symbols nobinary
+
+-- Read from default input stream (console) until end of data
+lines = ''
+lines[0] = 0
+
+inScanner = Scanner(System.in)
+loop l_ = 1 while inScanner.hasNext()
+  inLine = inScanner.nextLine()
+  lines[0] = l_
+  lines[l_] = inLine
+  end l_
+inScanner.close()
+
+loop l_ = 1 to lines[0]
+  say l_.right(4)':' lines[l_]
+  end l_
+
+return

Task/Input-loop/Nim/input-loop-1.nim

@@ -0,0 +1,3 @@
+var line = ""
+while stdin.readLine(line):
+  echo line

Task/Input-loop/Nim/input-loop-2.nim

@@ -0,0 +1,5 @@
+import strutils
+
+var lines = stdin.readAll()
+for line in lines.split("\n"):
+  echo line

Task/Input-loop/Nim/input-loop-3.nim

@@ -0,0 +1,4 @@
+var i = open("input.txt")
+for line in i.lines:
+  discard # process line
+i.close()

Task/Input-loop/Nim/input-loop-4.nim

@@ -0,0 +1,2 @@
+for line in "input.text".lines:
+  discard # process line

Task/Input-loop/OCaml/input-loop-1.ocaml

@@ -0,0 +1,6 @@
+let rec read_lines ic =
+  try
+    let line = input_line ic in
+    line :: read_lines ic
+  with End_of_file ->
+    []

Task/Input-loop/OCaml/input-loop-2.ocaml

@@ -0,0 +1,12 @@
+let read_line_opt ic =
+  try Some (input_line ic)
+  with End_of_file -> None
+
+let read_lines ic =
+  let rec loop acc =
+    match read_line_opt ic with
+    | Some line -> loop (line :: acc)
+    | None -> (List.rev acc)
+  in
+  loop []
+;;

Task/Input-loop/OCaml/input-loop-3.ocaml

@@ -0,0 +1,10 @@
+let read_lines f ic =
+  let rec loop () =
+    try f (input_line ic); loop ()
+    with End_of_file -> ()
+  in
+  loop ()
+
+let () =
+  let ic = open_in Sys.argv.(1) in
+  read_lines print_endline ic

Task/Input-loop/Oberon/input-loop.oberon

@@ -0,0 +1,18 @@
+MODULE InputLoop;
+IMPORT
+  StdChannels,
+  Channel;
+VAR
+  reader: Channel.Reader;
+  writer: Channel.Writer;
+  c: CHAR;
+BEGIN
+  reader := StdChannels.stdin.NewReader();
+  writer := StdChannels.stdout.NewWriter();
+
+  reader.ReadByte(c);
+  WHILE reader.res = Channel.done DO
+    writer.WriteByte(c);
+    reader.ReadByte(c)
+  END
+END InputLoop.

Task/Input-loop/Objeck/input-loop.objeck

@@ -0,0 +1,17 @@
+use IO;
+
+bundle Default {
+  class Test {
+    function : Main(args : System.String[]) ~ Nil {
+      f := FileReader->New("in.txt");
+      if(f->IsOpen()) {
+        string := f->ReadString();
+        while(string->Size() > 0) {
+          string->PrintLine();
+          string := f->ReadString();
+        };
+        f->Close();
+      };
+    }
+  }
+}

Task/Input-loop/Oforth/input-loop.fth

@@ -0,0 +1 @@
+: readFile(filename)   File new(filename) apply(#println) ;

Task/Input-loop/OxygenBasic/input-loop.basic

@@ -0,0 +1,9 @@
+uses Console
+uses ParseUtil
+string s=getfile "t.txt"
+int le=len s
+int i=1
+while i<le
+  print GetNextLine(s,i) cr
+wend
+pause

Task/Input-loop/Oz/input-loop.oz

@@ -0,0 +1,7 @@
+%% Returns a list of lines.
+%% Text: an instance of Open.text (a mixin class)
+fun {ReadAll Text}
+   case {Text getS($)} of false then nil
+   [] Line then Line|{ReadAll Text}
+   end
+end