aparler/ecp-benchmarks
1
0
Fork 0
forked from crp/ecp-benchmarks
Code Pull requests Activity

Add ability to change reference z value

Browse source
This commit is contained in:
Paul Romano 2019-07-24 21:54:12 -05:00
parent 9a24a5c4f5
commit 2d88d33730
1 changed files with 14 additions and 13 deletions
Download patch file Download diff file Expand all files Collapse all files

27
smr/smr/surfaces.py
View file

@ -40,7 +40,7 @@ clad_OR = 0.374*INCHES/2 # ML17013A274, Table 4.1-2
active_fuel_length = 78.74*INCHES # ML17013A274, Figure 4.2-10
plenum_length = 5.311*INCHES # ML17013A274, Figure 4.2-10
fuel_rod_length = 85.00*INCHES # ML17013A274, Table 4.1-2
lower_end_cap = 0.575*INCHES # ML17007A001, Table 3-2
lower_end_cap_length = 0.575*INCHES # ML17007A001, Table 3-2
# pin cell parameters
guide_tube_IR = 0.450*INCHES/2 # ML17013A274, Table 4.1-2
@ -83,15 +83,16 @@ rpv_IR = 96.5*INCHES/2 # ML17013A274, Table 5.3-1
rpv_OR = 105*INCHES/2 # ML17013A274, Table 5.3-1
# axial parameters
lowest_extent = 0.000
bottom_support_plate = 20.000
top_support_plate = 25.000
bottom_lower_nozzle = 25.000
top_lower_nozzle = 35.160
bottom_fuel_rod = 35.160
top_lower_thimble = 36.007
bottom_fuel_stack = 36.007
bot_burn_abs = 41.087
reference_z = 0.0
lowest_extent = reference_z
bottom_support_plate = lowest_extent + 20.000
top_support_plate = bottom_support_plate + 5.000
bottom_lower_nozzle = bottom_support_plate + 5.000
top_lower_nozzle = bottom_lower_nozzle + 4.0*INCHES
bottom_fuel_rod = bottom_lower_nozzle + 4.0*INCHES
top_lower_thimble = bottom_fuel_rod + lower_end_cap_length
bottom_fuel_stack = bottom_fuel_rod + lower_end_cap_length
bot_burn_abs = bottom_fuel_stack + 2.0*INCHES
top_active_core = bottom_fuel_stack + active_fuel_length
top_plenum = top_active_core + plenum_length
top_fuel_rod = bottom_fuel_rod + fuel_rod_length
@ -170,13 +171,13 @@ surfs['IT OR'] = copy.deepcopy(surfs['BA IR 6'])
# Rectangular prisms for grid spacers
surfs['rod grid box'] = \
openmc.get_rectangular_prism(rod_grid_side, rod_grid_side)
openmc.rectangular_prism(rod_grid_side, rod_grid_side)
# Rectangular prisms for lattice grid sleeves
surfs['lat grid box inner'] = \
openmc.get_rectangular_prism(17.*pin_pitch, 17.*pin_pitch)
openmc.rectangular_prism(17.*pin_pitch, 17.*pin_pitch)
surfs['lat grid box outer'] = \
openmc.get_rectangular_prism(grid_strap_side, grid_strap_side)
openmc.rectangular_prism(grid_strap_side, grid_strap_side)
surfs['bot support plate'] = openmc.ZPlane(
z0=bottom_support_plate, name='bot support plate')