aparler/openmc-designs
1
0
Fork 0
forked from crp/openmc-designs
Code Pull requests Activity
openmc-designs/own_make/pin_cell.py
Adam Parler 6bc46284d4 Added some various files
2023-12-16 19:49:46 -08:00

653 lines
No EOL
25 KiB
Python
Raw Blame History

from numbers import Integral
import numpy as np
import openmc
import openmc.model
def pwr_pin_cell():
"""Create a PWR pin-cell model.
This model is a single fuel pin with 2.4 w/o enriched UO2 corresponding to a
beginning-of-cycle condition and borated water. The specifications are from
the `BEAVRS <http://crpg.mit.edu/research/beavrs>`_ benchmark. Note that the
number of particles/batches is initially set very low for testing purposes.
Returns
-------
model : openmc.model.Model
A PWR pin-cell model
"""
model = openmc.model.Model()
# Define materials.
fuel = openmc.Material(name='UO2 (2.4%)')
fuel.set_density('g/cm3', 10.29769)
fuel.add_nuclide('U234', 4.4843e-6)
fuel.add_nuclide('U235', 5.5815e-4)
fuel.add_nuclide('U238', 2.2408e-2)
fuel.add_nuclide('O16', 4.5829e-2)
clad = openmc.Material(name='Zircaloy')
clad.set_density('g/cm3', 6.55)
clad.add_nuclide('Zr90', 2.1827e-2)
clad.add_nuclide('Zr91', 4.7600e-3)
clad.add_nuclide('Zr92', 7.2758e-3)
clad.add_nuclide('Zr94', 7.3734e-3)
clad.add_nuclide('Zr96', 1.1879e-3)
hot_water = openmc.Material(name='Hot borated water')
hot_water.set_density('g/cm3', 0.740582)
hot_water.add_nuclide('H1', 4.9457e-2)
hot_water.add_nuclide('O16', 2.4672e-2)
hot_water.add_nuclide('B10', 8.0042e-6)
hot_water.add_nuclide('B11', 3.2218e-5)
hot_water.add_s_alpha_beta('c_H_in_H2O')
# Define the materials file.
model.materials = (fuel, clad, hot_water)
# Instantiate ZCylinder surfaces
pitch = 1.26
fuel_or = openmc.ZCylinder(x0=0, y0=0, r=0.39218, name='Fuel OR')
clad_or = openmc.ZCylinder(x0=0, y0=0, r=0.45720, name='Clad OR')
left = openmc.XPlane(x0=-pitch/2, name='left', boundary_type='reflective')
right = openmc.XPlane(x0=pitch/2, name='right', boundary_type='reflective')
bottom = openmc.YPlane(y0=-pitch/2, name='bottom',
boundary_type='reflective')
top = openmc.YPlane(y0=pitch/2, name='top', boundary_type='reflective')
# Instantiate Cells
fuel_pin = openmc.Cell(name='Fuel', fill=fuel)
cladding = openmc.Cell(name='Cladding', fill=clad)
water = openmc.Cell(name='Water', fill=hot_water)
# Use surface half-spaces to define regions
fuel_pin.region = -fuel_or
cladding.region = +fuel_or & -clad_or
water.region = +clad_or & +left & -right & +bottom & -top
# Create root universe
model.geometry.root_universe = openmc.Universe(0, name='root universe')
model.geometry.root_universe.add_cells([fuel_pin, cladding, water])
model.settings.batches = 10
model.settings.inactive = 5
model.settings.particles = 100
model.settings.source = openmc.Source(space=openmc.stats.Box(
[-pitch/2, -pitch/2, -1], [pitch/2, pitch/2, 1], only_fissionable=True))
plot = openmc.Plot.from_geometry(model.geometry)
plot.pixels = (300, 300)
plot.color_by = 'material'
model.plots.append(plot)
return model
def pwr_core():
"""Create a PWR full-core model.
This model is the OECD/NEA Monte Carlo Performance benchmark which is a
grossly simplified pressurized water reactor (PWR) with 241 fuel
assemblies. Note that the number of particles/batches is initially set very
low for testing purposes.
Returns
-------
model : openmc.model.Model
Full-core PWR model
"""
model = openmc.model.Model()
# Define materials.
fuel = openmc.Material(1, name='UOX fuel')
fuel.set_density('g/cm3', 10.062)
fuel.add_nuclide('U234', 4.9476e-6)
fuel.add_nuclide('U235', 4.8218e-4)
fuel.add_nuclide('U238', 2.1504e-2)
fuel.add_nuclide('Xe135', 1.0801e-8)
fuel.add_nuclide('O16', 4.5737e-2)
clad = openmc.Material(2, name='Zircaloy')
clad.set_density('g/cm3', 5.77)
clad.add_nuclide('Zr90', 0.5145)
clad.add_nuclide('Zr91', 0.1122)
clad.add_nuclide('Zr92', 0.1715)
clad.add_nuclide('Zr94', 0.1738)
clad.add_nuclide('Zr96', 0.0280)
cold_water = openmc.Material(3, name='Cold borated water')
cold_water.set_density('atom/b-cm', 0.07416)
cold_water.add_nuclide('H1', 2.0)
cold_water.add_nuclide('O16', 1.0)
cold_water.add_nuclide('B10', 6.490e-4)
cold_water.add_nuclide('B11', 2.689e-3)
cold_water.add_s_alpha_beta('c_H_in_H2O')
hot_water = openmc.Material(4, name='Hot borated water')
hot_water.set_density('atom/b-cm', 0.06614)
hot_water.add_nuclide('H1', 2.0)
hot_water.add_nuclide('O16', 1.0)
hot_water.add_nuclide('B10', 6.490e-4)
hot_water.add_nuclide('B11', 2.689e-3)
hot_water.add_s_alpha_beta('c_H_in_H2O')
rpv_steel = openmc.Material(5, name='Reactor pressure vessel steel')
rpv_steel.set_density('g/cm3', 7.9)
rpv_steel.add_nuclide('Fe54', 0.05437098, 'wo')
rpv_steel.add_nuclide('Fe56', 0.88500663, 'wo')
rpv_steel.add_nuclide('Fe57', 0.0208008, 'wo')
rpv_steel.add_nuclide('Fe58', 0.00282159, 'wo')
rpv_steel.add_nuclide('Ni58', 0.0067198, 'wo')
rpv_steel.add_nuclide('Ni60', 0.0026776, 'wo')
rpv_steel.add_nuclide('Mn55', 0.01, 'wo')
rpv_steel.add_nuclide('Cr52', 0.002092475, 'wo')
rpv_steel.add_nuclide('C0', 0.0025, 'wo')
rpv_steel.add_nuclide('Cu63', 0.0013696, 'wo')
lower_rad_ref = openmc.Material(6, name='Lower radial reflector')
lower_rad_ref.set_density('g/cm3', 4.32)
lower_rad_ref.add_nuclide('H1', 0.0095661, 'wo')
lower_rad_ref.add_nuclide('O16', 0.0759107, 'wo')
lower_rad_ref.add_nuclide('B10', 3.08409e-5, 'wo')
lower_rad_ref.add_nuclide('B11', 1.40499e-4, 'wo')
lower_rad_ref.add_nuclide('Fe54', 0.035620772088, 'wo')
lower_rad_ref.add_nuclide('Fe56', 0.579805982228, 'wo')
lower_rad_ref.add_nuclide('Fe57', 0.01362750048, 'wo')
lower_rad_ref.add_nuclide('Fe58', 0.001848545204, 'wo')
lower_rad_ref.add_nuclide('Ni58', 0.055298376566, 'wo')
lower_rad_ref.add_nuclide('Mn55', 0.0182870, 'wo')
lower_rad_ref.add_nuclide('Cr52', 0.145407678031, 'wo')
lower_rad_ref.add_s_alpha_beta('c_H_in_H2O')
upper_rad_ref = openmc.Material(7, name='Upper radial reflector / Top plate region')
upper_rad_ref.set_density('g/cm3', 4.28)
upper_rad_ref.add_nuclide('H1', 0.0086117, 'wo')
upper_rad_ref.add_nuclide('O16', 0.0683369, 'wo')
upper_rad_ref.add_nuclide('B10', 2.77638e-5, 'wo')
upper_rad_ref.add_nuclide('B11', 1.26481e-4, 'wo')
upper_rad_ref.add_nuclide('Fe54', 0.035953677186, 'wo')
upper_rad_ref.add_nuclide('Fe56', 0.585224740891, 'wo')
upper_rad_ref.add_nuclide('Fe57', 0.01375486056, 'wo')
upper_rad_ref.add_nuclide('Fe58', 0.001865821363, 'wo')
upper_rad_ref.add_nuclide('Ni58', 0.055815129186, 'wo')
upper_rad_ref.add_nuclide('Mn55', 0.0184579, 'wo')
upper_rad_ref.add_nuclide('Cr52', 0.146766614995, 'wo')
upper_rad_ref.add_s_alpha_beta('c_H_in_H2O')
bot_plate = openmc.Material(8, name='Bottom plate region')
bot_plate.set_density('g/cm3', 7.184)
bot_plate.add_nuclide('H1', 0.0011505, 'wo')
bot_plate.add_nuclide('O16', 0.0091296, 'wo')
bot_plate.add_nuclide('B10', 3.70915e-6, 'wo')
bot_plate.add_nuclide('B11', 1.68974e-5, 'wo')
bot_plate.add_nuclide('Fe54', 0.03855611055, 'wo')
bot_plate.add_nuclide('Fe56', 0.627585036425, 'wo')
bot_plate.add_nuclide('Fe57', 0.014750478, 'wo')
bot_plate.add_nuclide('Fe58', 0.002000875025, 'wo')
bot_plate.add_nuclide('Ni58', 0.059855207342, 'wo')
bot_plate.add_nuclide('Mn55', 0.0197940, 'wo')
bot_plate.add_nuclide('Cr52', 0.157390026871, 'wo')
bot_plate.add_s_alpha_beta('c_H_in_H2O')
bot_nozzle = openmc.Material(9, name='Bottom nozzle region')
bot_nozzle.set_density('g/cm3', 2.53)
bot_nozzle.add_nuclide('H1', 0.0245014, 'wo')
bot_nozzle.add_nuclide('O16', 0.1944274, 'wo')
bot_nozzle.add_nuclide('B10', 7.89917e-5, 'wo')
bot_nozzle.add_nuclide('B11', 3.59854e-4, 'wo')
bot_nozzle.add_nuclide('Fe54', 0.030411411144, 'wo')
bot_nozzle.add_nuclide('Fe56', 0.495012237964, 'wo')
bot_nozzle.add_nuclide('Fe57', 0.01163454624, 'wo')
bot_nozzle.add_nuclide('Fe58', 0.001578204652, 'wo')
bot_nozzle.add_nuclide('Ni58', 0.047211231662, 'wo')
bot_nozzle.add_nuclide('Mn55', 0.0156126, 'wo')
bot_nozzle.add_nuclide('Cr52', 0.124142524198, 'wo')
bot_nozzle.add_s_alpha_beta('c_H_in_H2O')
top_nozzle = openmc.Material(10, name='Top nozzle region')
top_nozzle.set_density('g/cm3', 1.746)
top_nozzle.add_nuclide('H1', 0.0358870, 'wo')
top_nozzle.add_nuclide('O16', 0.2847761, 'wo')
top_nozzle.add_nuclide('B10', 1.15699e-4, 'wo')
top_nozzle.add_nuclide('B11', 5.27075e-4, 'wo')
top_nozzle.add_nuclide('Fe54', 0.02644016154, 'wo')
top_nozzle.add_nuclide('Fe56', 0.43037146399, 'wo')
top_nozzle.add_nuclide('Fe57', 0.0101152584, 'wo')
top_nozzle.add_nuclide('Fe58', 0.00137211607, 'wo')
top_nozzle.add_nuclide('Ni58', 0.04104621835, 'wo')
top_nozzle.add_nuclide('Mn55', 0.0135739, 'wo')
top_nozzle.add_nuclide('Cr52', 0.107931450781, 'wo')
top_nozzle.add_s_alpha_beta('c_H_in_H2O')
top_fa = openmc.Material(11, name='Top of fuel assemblies')
top_fa.set_density('g/cm3', 3.044)
top_fa.add_nuclide('H1', 0.0162913, 'wo')
top_fa.add_nuclide('O16', 0.1292776, 'wo')
top_fa.add_nuclide('B10', 5.25228e-5, 'wo')
top_fa.add_nuclide('B11', 2.39272e-4, 'wo')
top_fa.add_nuclide('Zr90', 0.43313403903, 'wo')
top_fa.add_nuclide('Zr91', 0.09549277374, 'wo')
top_fa.add_nuclide('Zr92', 0.14759527104, 'wo')
top_fa.add_nuclide('Zr94', 0.15280552077, 'wo')
top_fa.add_nuclide('Zr96', 0.02511169542, 'wo')
top_fa.add_s_alpha_beta('c_H_in_H2O')
bot_fa = openmc.Material(12, name='Bottom of fuel assemblies')
bot_fa.set_density('g/cm3', 1.762)
bot_fa.add_nuclide('H1', 0.0292856, 'wo')
bot_fa.add_nuclide('O16', 0.2323919, 'wo')
bot_fa.add_nuclide('B10', 9.44159e-5, 'wo')
bot_fa.add_nuclide('B11', 4.30120e-4, 'wo')
bot_fa.add_nuclide('Zr90', 0.3741373658, 'wo')
bot_fa.add_nuclide('Zr91', 0.0824858164, 'wo')
bot_fa.add_nuclide('Zr92', 0.1274914944, 'wo')
bot_fa.add_nuclide('Zr94', 0.1319920622, 'wo')
bot_fa.add_nuclide('Zr96', 0.0216912612, 'wo')
bot_fa.add_s_alpha_beta('c_H_in_H2O')
# Define the materials file.
model.materials = (fuel, clad, cold_water, hot_water, rpv_steel,
lower_rad_ref, upper_rad_ref, bot_plate,
bot_nozzle, top_nozzle, top_fa, bot_fa)
# Define surfaces.
s1 = openmc.ZCylinder(r=0.41, surface_id=1)
s2 = openmc.ZCylinder(r=0.475, surface_id=2)
s3 = openmc.ZCylinder(r=0.56, surface_id=3)
s4 = openmc.ZCylinder(r=0.62, surface_id=4)
s5 = openmc.ZCylinder(r=187.6, surface_id=5)
s6 = openmc.ZCylinder(r=209.0, surface_id=6)
s7 = openmc.ZCylinder(r=229.0, surface_id=7)
s8 = openmc.ZCylinder(r=249.0, surface_id=8, boundary_type='vacuum')
s31 = openmc.ZPlane(z0=-229.0, surface_id=31, boundary_type='vacuum')
s32 = openmc.ZPlane(z0=-199.0, surface_id=32)
s33 = openmc.ZPlane(z0=-193.0, surface_id=33)
s34 = openmc.ZPlane(z0=-183.0, surface_id=34)
s35 = openmc.ZPlane(z0=0.0, surface_id=35)
s36 = openmc.ZPlane(z0=183.0, surface_id=36)
s37 = openmc.ZPlane(z0=203.0, surface_id=37)
s38 = openmc.ZPlane(z0=215.0, surface_id=38)
s39 = openmc.ZPlane(z0=223.0, surface_id=39, boundary_type='vacuum')
# Define pin cells.
fuel_cold = openmc.Universe(name='Fuel pin, cladding, cold water',
universe_id=1)
c21 = openmc.Cell(cell_id=21, fill=fuel, region=-s1)
c22 = openmc.Cell(cell_id=22, fill=clad, region=+s1 & -s2)
c23 = openmc.Cell(cell_id=23, fill=cold_water, region=+s2)
fuel_cold.add_cells((c21, c22, c23))
tube_cold = openmc.Universe(name='Instrumentation guide tube, '
'cold water', universe_id=2)
c24 = openmc.Cell(cell_id=24, fill=cold_water, region=-s3)
c25 = openmc.Cell(cell_id=25, fill=clad, region=+s3 & -s4)
c26 = openmc.Cell(cell_id=26, fill=cold_water, region=+s4)
tube_cold.add_cells((c24, c25, c26))
fuel_hot = openmc.Universe(name='Fuel pin, cladding, hot water',
universe_id=3)
c27 = openmc.Cell(cell_id=27, fill=fuel, region=-s1)
c28 = openmc.Cell(cell_id=28, fill=clad, region=+s1 & -s2)
c29 = openmc.Cell(cell_id=29, fill=hot_water, region=+s2)
fuel_hot.add_cells((c27, c28, c29))
tube_hot = openmc.Universe(name='Instrumentation guide tube, hot water',
universe_id=4)
c30 = openmc.Cell(cell_id=30, fill=hot_water, region=-s3)
c31 = openmc.Cell(cell_id=31, fill=clad, region=+s3 & -s4)
c32 = openmc.Cell(cell_id=32, fill=hot_water, region=+s4)
tube_hot.add_cells((c30, c31, c32))
# Set positions occupied by guide tubes
tube_x = np.array([5, 8, 11, 3, 13, 2, 5, 8, 11, 14, 2, 5, 8, 11, 14,
2, 5, 8, 11, 14, 3, 13, 5, 8, 11])
tube_y = np.array([2, 2, 2, 3, 3, 5, 5, 5, 5, 5, 8, 8, 8, 8, 8,
11, 11, 11, 11, 11, 13, 13, 14, 14, 14])
# Define fuel lattices.
l100 = openmc.RectLattice(name='Fuel assembly (lower half)', lattice_id=100)
l100.lower_left = (-10.71, -10.71)
l100.pitch = (1.26, 1.26)
l100.universes = np.tile(fuel_cold, (17, 17))
l100.universes[tube_x, tube_y] = tube_cold
l101 = openmc.RectLattice(name='Fuel assembly (upper half)', lattice_id=101)
l101.lower_left = (-10.71, -10.71)
l101.pitch = (1.26, 1.26)
l101.universes = np.tile(fuel_hot, (17, 17))
l101.universes[tube_x, tube_y] = tube_hot
# Define assemblies.
fa_cw = openmc.Universe(name='Water assembly (cold)', universe_id=5)
c50 = openmc.Cell(cell_id=50, fill=cold_water, region=+s34 & -s35)
fa_cw.add_cell(c50)
fa_hw = openmc.Universe(name='Water assembly (hot)', universe_id=7)
c70 = openmc.Cell(cell_id=70, fill=hot_water, region=+s35 & -s36)
fa_hw.add_cell(c70)
fa_cold = openmc.Universe(name='Fuel assembly (cold)', universe_id=6)
c60 = openmc.Cell(cell_id=60, fill=l100, region=+s34 & -s35)
fa_cold.add_cell(c60)
fa_hot = openmc.Universe(name='Fuel assembly (hot)', universe_id=8)
c80 = openmc.Cell(cell_id=80, fill=l101, region=+s35 & -s36)
fa_hot.add_cell(c80)
# Define core lattices
l200 = openmc.RectLattice(name='Core lattice (lower half)', lattice_id=200)
l200.lower_left = (-224.91, -224.91)
l200.pitch = (21.42, 21.42)
l200.universes = [
[fa_cw]*21,
[fa_cw]*21,
[fa_cw]*7 + [fa_cold]*7 + [fa_cw]*7,
[fa_cw]*5 + [fa_cold]*11 + [fa_cw]*5,
[fa_cw]*4 + [fa_cold]*13 + [fa_cw]*4,
[fa_cw]*3 + [fa_cold]*15 + [fa_cw]*3,
[fa_cw]*3 + [fa_cold]*15 + [fa_cw]*3,
[fa_cw]*2 + [fa_cold]*17 + [fa_cw]*2,
[fa_cw]*2 + [fa_cold]*17 + [fa_cw]*2,
[fa_cw]*2 + [fa_cold]*17 + [fa_cw]*2,
[fa_cw]*2 + [fa_cold]*17 + [fa_cw]*2,
[fa_cw]*2 + [fa_cold]*17 + [fa_cw]*2,
[fa_cw]*2 + [fa_cold]*17 + [fa_cw]*2,
[fa_cw]*2 + [fa_cold]*17 + [fa_cw]*2,
[fa_cw]*3 + [fa_cold]*15 + [fa_cw]*3,
[fa_cw]*3 + [fa_cold]*15 + [fa_cw]*3,
[fa_cw]*4 + [fa_cold]*13 + [fa_cw]*4,
[fa_cw]*5 + [fa_cold]*11 + [fa_cw]*5,
[fa_cw]*7 + [fa_cold]*7 + [fa_cw]*7,
[fa_cw]*21,
[fa_cw]*21]
l201 = openmc.RectLattice(name='Core lattice (lower half)', lattice_id=201)
l201.lower_left = (-224.91, -224.91)
l201.pitch = (21.42, 21.42)
l201.universes = [
[fa_hw]*21,
[fa_hw]*21,
[fa_hw]*7 + [fa_hot]*7 + [fa_hw]*7,
[fa_hw]*5 + [fa_hot]*11 + [fa_hw]*5,
[fa_hw]*4 + [fa_hot]*13 + [fa_hw]*4,
[fa_hw]*3 + [fa_hot]*15 + [fa_hw]*3,
[fa_hw]*3 + [fa_hot]*15 + [fa_hw]*3,
[fa_hw]*2 + [fa_hot]*17 + [fa_hw]*2,
[fa_hw]*2 + [fa_hot]*17 + [fa_hw]*2,
[fa_hw]*2 + [fa_hot]*17 + [fa_hw]*2,
[fa_hw]*2 + [fa_hot]*17 + [fa_hw]*2,
[fa_hw]*2 + [fa_hot]*17 + [fa_hw]*2,
[fa_hw]*2 + [fa_hot]*17 + [fa_hw]*2,
[fa_hw]*2 + [fa_hot]*17 + [fa_hw]*2,
[fa_hw]*3 + [fa_hot]*15 + [fa_hw]*3,
[fa_hw]*3 + [fa_hot]*15 + [fa_hw]*3,
[fa_hw]*4 + [fa_hot]*13 + [fa_hw]*4,
[fa_hw]*5 + [fa_hot]*11 + [fa_hw]*5,
[fa_hw]*7 + [fa_hot]*7 + [fa_hw]*7,
[fa_hw]*21,
[fa_hw]*21]
# Define root universe.
root = openmc.Universe(universe_id=0, name='root universe')
c1 = openmc.Cell(cell_id=1, fill=l200, region=-s6 & +s34 & -s35)
c2 = openmc.Cell(cell_id=2, fill=l201, region=-s6 & +s35 & -s36)
c3 = openmc.Cell(cell_id=3, fill=bot_plate, region=-s7 & +s31 & -s32)
c4 = openmc.Cell(cell_id=4, fill=bot_nozzle, region=-s5 & +s32 & -s33)
c5 = openmc.Cell(cell_id=5, fill=bot_fa, region=-s5 & +s33 & -s34)
c6 = openmc.Cell(cell_id=6, fill=top_fa, region=-s5 & +s36 & -s37)
c7 = openmc.Cell(cell_id=7, fill=top_nozzle, region=-s5 & +s37 & -s38)
c8 = openmc.Cell(cell_id=8, fill=upper_rad_ref, region=-s7 & +s38 & -s39)
c9 = openmc.Cell(cell_id=9, fill=bot_nozzle, region=+s6 & -s7 & +s32 & -s38)
c10 = openmc.Cell(cell_id=10, fill=rpv_steel, region=+s7 & -s8 & +s31 & -s39)
c11 = openmc.Cell(cell_id=11, fill=lower_rad_ref, region=+s5 & -s6 & +s32 & -s34)
c12 = openmc.Cell(cell_id=12, fill=upper_rad_ref, region=+s5 & -s6 & +s36 & -s38)
root.add_cells((c1, c2, c3, c4, c5, c6, c7, c8, c9, c10, c11, c12))
# Assign root universe to geometry
model.geometry.root_universe = root
model.settings.batches = 10
model.settings.inactive = 5
model.settings.particles = 100
model.settings.source = openmc.Source(space=openmc.stats.Box(
[-160, -160, -183], [160, 160, 183]))
plot = openmc.Plot()
# plot.basis = 'yz'
plot.type = 'voxel'
plot.origin = (0, 0, 0)
plot.width = (500, 500, 500)
plot.pixels = (250, 250, 250)
# plot.color_by = 'material'
model.plots.append(plot)
return model
def pwr_assembly():
"""Create a PWR assembly model.
This model is a reflected 17x17 fuel assembly from the the `BEAVRS
<http://crpg.mit.edu/research/beavrs>`_ benchmark. The fuel is 2.4 w/o
enriched UO2 corresponding to a beginning-of-cycle condition. Note that the
number of particles/batches is initially set very low for testing purposes.
Returns
-------
model : openmc.model.Model
A PWR assembly model
"""
model = openmc.model.Model()
# Define materials.
fuel = openmc.Material(name='Fuel')
fuel.set_density('g/cm3', 10.29769)
fuel.add_nuclide('U234', 4.4843e-6)
fuel.add_nuclide('U235', 5.5815e-4)
fuel.add_nuclide('U238', 2.2408e-2)
fuel.add_nuclide('O16', 4.5829e-2)
clad = openmc.Material(name='Cladding')
clad.set_density('g/cm3', 6.55)
clad.add_nuclide('Zr90', 2.1827e-2)
clad.add_nuclide('Zr91', 4.7600e-3)
clad.add_nuclide('Zr92', 7.2758e-3)
clad.add_nuclide('Zr94', 7.3734e-3)
clad.add_nuclide('Zr96', 1.1879e-3)
hot_water = openmc.Material(name='Hot borated water')
hot_water.set_density('g/cm3', 0.740582)
hot_water.add_nuclide('H1', 4.9457e-2)
hot_water.add_nuclide('O16', 2.4672e-2)
hot_water.add_nuclide('B10', 8.0042e-6)
hot_water.add_nuclide('B11', 3.2218e-5)
hot_water.add_s_alpha_beta('c_H_in_H2O')
# Define the materials file.
model.materials = (fuel, clad, hot_water)
# Instantiate ZCylinder surfaces
fuel_or = openmc.ZCylinder(x0=0, y0=0, r=0.39218, name='Fuel OR')
clad_or = openmc.ZCylinder(x0=0, y0=0, r=0.45720, name='Clad OR')
# Create boundary planes to surround the geometry
pitch = 21.42
min_x = openmc.XPlane(x0=-pitch/2, boundary_type='reflective')
max_x = openmc.XPlane(x0=+pitch/2, boundary_type='reflective')
min_y = openmc.YPlane(y0=-pitch/2, boundary_type='reflective')
max_y = openmc.YPlane(y0=+pitch/2, boundary_type='reflective')
# Create a fuel pin universe
fuel_pin_universe = openmc.Universe(name='Fuel Pin')
fuel_cell = openmc.Cell(name='fuel', fill=fuel, region=-fuel_or)
clad_cell = openmc.Cell(name='clad', fill=clad, region=+fuel_or & -clad_or)
hot_water_cell = openmc.Cell(name='hot water', fill=hot_water, region=+clad_or)
fuel_pin_universe.add_cells([fuel_cell, clad_cell, hot_water_cell])
# Create a control rod guide tube universe
guide_tube_universe = openmc.Universe(name='Guide Tube')
gt_inner_cell = openmc.Cell(name='guide tube inner water', fill=hot_water,
region=-fuel_or)
gt_clad_cell = openmc.Cell(name='guide tube clad', fill=clad,
region=+fuel_or & -clad_or)
gt_outer_cell = openmc.Cell(name='guide tube outer water', fill=hot_water,
region=+clad_or)
guide_tube_universe.add_cells([gt_inner_cell, gt_clad_cell, gt_outer_cell])
# Create fuel assembly Lattice
assembly = openmc.RectLattice(name='Fuel Assembly')
assembly.pitch = (pitch/17, pitch/17)
assembly.lower_left = (-pitch/2, -pitch/2)
# Create array indices for guide tube locations in lattice
template_x = np.array([5, 8, 11, 3, 13, 2, 5, 8, 11, 14, 2, 5, 8,
11, 14, 2, 5, 8, 11, 14, 3, 13, 5, 8, 11])
template_y = np.array([2, 2, 2, 3, 3, 5, 5, 5, 5, 5, 8, 8, 8, 8,
8, 11, 11, 11, 11, 11, 13, 13, 14, 14, 14])
# Create 17x17 array of universes
assembly.universes = np.tile(fuel_pin_universe, (17, 17))
assembly.universes[template_x, template_y] = guide_tube_universe
# Create root Cell
root_cell = openmc.Cell(name='root cell', fill=assembly)
root_cell.region = +min_x & -max_x & +min_y & -max_y
# Create root Universe
model.geometry.root_universe = openmc.Universe(name='root universe')
model.geometry.root_universe.add_cell(root_cell)
model.settings.batches = 10
model.settings.inactive = 5
model.settings.particles = 100
model.settings.source = openmc.Source(space=openmc.stats.Box(
[-pitch/2, -pitch/2, -1], [pitch/2, pitch/2, 1], only_fissionable=True))
plot = openmc.Plot()
plot.basis = 'yz'
plot.origin = (0, 0, 40000)
plot.width = (25, 250)
plot.pixels = (300, 3000)
plot.color_by = 'material'
model.plots.append(plot)
return model
def slab_mg(num_regions=1, mat_names=None, mgxslib_name='2g.h5'):
"""Create a 1D slab model.
Parameters
----------
num_regions : int, optional
Number of regions in the problem, each with a unique MGXS dataset.
Defaults to 1.
mat_names : Iterable of str, optional
List of the material names to use; defaults to ['mat_1', 'mat_2',...].
mgxslib_name : str, optional
MGXS Library file to use; defaults to '2g.h5'.
Returns
-------
model : openmc.model.Model
One-group, 1D slab model
"""
openmc.check_type('num_regions', num_regions, Integral)
openmc.check_greater_than('num_regions', num_regions, 0)
if mat_names is not None:
openmc.check_length('mat_names', mat_names, num_regions)
openmc.check_iterable_type('mat_names', mat_names, str)
else:
mat_names = []
for i in range(num_regions):
mat_names.append('mat_' + str(i + 1))
# # Make Materials
materials_file = openmc.Materials()
macros = []
mats = []
for i in range(len(mat_names)):
macros.append(openmc.Macroscopic('mat_' + str(i + 1)))
mats.append(openmc.Material(name=mat_names[i]))
mats[-1].set_density('macro', 1.0)
mats[-1].add_macroscopic(macros[-1])
materials_file += mats
materials_file.cross_sections = mgxslib_name
# # Make Geometry
rad_outer = 929.45
# Set a cell boundary to exist for every material above (exclude the 0)
rads = np.linspace(0., rad_outer, len(mats) + 1, endpoint=True)[1:]
# Instantiate Universe
root = openmc.Universe(universe_id=0, name='root universe')
cells = []
surfs = []
surfs.append(openmc.XPlane(x0=0., boundary_type='reflective'))
for r, rad in enumerate(rads):
if r == len(rads) - 1:
surfs.append(openmc.XPlane(x0=rad, boundary_type='vacuum'))
else:
surfs.append(openmc.XPlane(x0=rad))
# Instantiate Cells
cells = []
for c in range(len(surfs) - 1):
cells.append(openmc.Cell())
cells[-1].region = (+surfs[c] & -surfs[c + 1])
cells[-1].fill = mats[c]
# Register Cells with Universe
root.add_cells(cells)
# Instantiate a Geometry, register the root Universe, and export to XML
geometry_file = openmc.Geometry(root)
# # Make Settings
# Instantiate a Settings object, set all runtime parameters
settings_file = openmc.Settings()
settings_file.energy_mode = 'multi-group'
settings_file.tabular_legendre = {'enable': False}
settings_file.batches = 10
settings_file.inactive = 5
settings_file.particles = 1000
# Build source distribution
INF = 1000.
bounds = [0., -INF, -INF, rads[0], INF, INF]
uniform_dist = openmc.stats.Box(bounds[:3], bounds[3:])
settings_file.source = openmc.Source(space=uniform_dist)
settings_file.output = {'summary': False}
model = openmc.model.Model()
model.geometry = geometry_file
model.materials = materials_file
model.settings = settings_file
model.xs_data = macros
return model
if __name__ == "__main__":
rtn = pwr_core()
rtn.export_to_xml()
openmc.plot_geometry()
View git blame Copy permalink