crp/BEAVRS
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
BEAVRS/docs/specifications/scripts/make_axial_figs.py

573 lines
32 KiB
Python
Raw Permalink Normal View History

BEAVRS v3.0
2018-08-29 08:31:36 -07:00
#!/usr/bin/env python
from __future__ import division
import sys
import os
fig_t = r"""\begin{{figure}}[htbp]
\centering
\begin{{tikzpicture}}[scale={scale},x=1in,y=1in]{tikzpic}
{matrix}
\end{{tikzpicture}}
\caption[{shortcap}]{{{caption}\label{{{label}}}}}
\end{{figure}}"""
matrix_t = r""" \matrix [matrix of nodes,row sep=0,column sep=0]
{{{rows}
}};
"""
row_t = """\n \draw (-1,{bot}) rectangle (1,{top}); & {fill} \\\\"""
## <!--- axials copied straight from rod_axials.ods
# Core Structures
struct_LowestExtent = "0.00000" #
struct_SupportPlate_bot = "20.0000" # arbitrary amount of water below core
struct_SupportPlate_top = "25.0000" # guessed
struct_LowerNozzle_bot = "25.0000" # same as struct_SupportPlate_top
struct_LowerNozzle_top = "35.0000" # approx from ** NDR of 4.088in for lower nozzle height
struct_UpperNozzle_bot = "423.049" # fig 4.2-3 from Watts Bar Unit 2 safety analysis report
struct_UpperNozzle_top = "431.876" # fig 4.2-3 from Watts Bar Unit 2 safety analysis report
struct_HighestExtent = "460.000" # arbitrary amount of water above core
# Fuel Rod
fuel_Rod_bot = "35.0000" # same as struct_LowerNozzle_top
fuel_LowerFitting_bot = "35.0000" # ML033530020 Fig 2-7
fuel_LowerFitting_top = "36.7480" # ML033530020 Fig 2-7
fuel_ActiveFuel_bot = "36.7480" # ML033530020 Fig 2-7
fuel_ActiveFuel_top = "402.508" # ML033530020 Fig 2-7
fuel_Plenum_bot = "402.508" # ML033530020 Fig 2-7
fuel_Plenum_top = "417.164" # ML033530020 Fig 2-7
fuel_UpperFitting_bot = "417.164" # ML033530020 Fig 2-7
fuel_UpperFitting_top = "419.704" # ML033530020 Fig 2-7
fuel_Rod_top = "419.704" # ML033530020 Fig 2-7
# RCCAs (0 steps withdraw, i.e., fully inserted)
rcca_Rod_bot = "39.9580" # ML033530020 Fig 2-8
rcca_LowerFitting_bot = "39.9580" # ML033530020 Fig 2-8
rcca_LowerFitting_top = "41.8280" # ML033530020 Fig 2-8
rcca_AIC_bot = "41.8280" # ML033530020 Fig 2-8
rcca_AIC_top = "143.428" # ML033530020 Fig 2-8
rcca_B4C_bot = "143.428" # ML033530020 Fig 2-8
rcca_B4C_top = "402.508" # ML033530020 Fig 2-8
rcca_Spacer_bot = "402.508" # ML033530020 Fig 2-8
rcca_Spacer_top = "403.778" # ML033530020 Fig 2-8
rcca_Plenum_bot = "403.778" # ML033530020 Fig 2-8
rcca_Plenum_top = "415.558" # ML033530020 Fig 2-8
rcca_Rod_top = "460.000" # same as struct_HighestExtent
rcca_StepWidth = "1.58193" # Active height divided into 228 steps
# BPRAs
bpra_Rod_bot = "38.6600" # ML033530020 Fig 2-9
bpra_LowerFitting_bot = "38.6600" # ML033530020 Fig 2-9
bpra_LowerFitting_top = "40.5580" # ML033530020 Fig 2-9
bpra_Active_bot = "40.5580" # ML033530020 Fig 2-9
bpra_Active_top = "401.238" # ML033530020 Fig 2-9
bpra_Plenum_bot = "401.238" # ML033530020 Fig 2-9
bpra_Plenum_top = "421.532" # ML033530020 Fig 2-9
bpra_Rod_top = "431.876" # same as struct_UpperNozzle_top
# Guide Tube
gt_Rod_bot = "35.0000" # same as fuel_Rod_bot
gt_Dashpot_bot = "35.0000" #
gt_Dashpot_top = "39.9580" # same as rcca_Rod_bot for full insertion
gt_Upper_bot = "39.9580" #
gt_Upper_top = "423.049" # same as struct_UpperNozzle_bot
gt_Rod_top = "423.049" #
# Intrument Tube
instr_Rod_bot = "35.0000" # same as fuel_Rod_bot
instr_Rod_top = "423.049" # same as struct_UpperNozzle_bot
# Grid Spacers (centers provided by utiliy) (heights 1.65 top/bottom, 2.25 intermediate)
grid1_bot = "37.1621" #
grid1_top = "40.5200" #
grid2_bot = "98.0250" #
grid2_top = "103.740" #
grid3_bot = "150.222" #
grid3_top = "155.937" #
grid4_bot = "202.419" #
grid4_top = "208.134" #
grid5_bot = "254.616" #
grid5_top = "260.331" #
grid6_bot = "306.813" #
grid6_top = "312.528" #
grid7_bot = "359.010" #
grid7_top = "364.725" #
grid8_bot = "411.806" #
grid8_top = "415.164" #
## -- axials copied straight from rod_axials.ods -->
# order doesn't matter here: this will be put into a dictionary
all_planes= [ ['Lowest Extent', struct_LowestExtent],
['Bottom of Support Plate', struct_SupportPlate_bot],
['Top of Support Plate', struct_SupportPlate_top],
['Bottom of Fuel Rod', fuel_Rod_bot],
['Bottom of Active Fuel', fuel_ActiveFuel_bot],
['Grid 1 Bottom', grid1_bot],
['Bot. of BPRA Rod', bpra_Rod_bot],
['Control Rod Step 0', rcca_Rod_bot],
['Bottom of Active Absorber', bpra_Active_bot],
['Grid 1 Top', grid1_top],
['Grid 2 Bottom', grid2_bot],
['Grid 2 Top', grid2_top],
['Grid 3 Bottom', grid3_bot],
['Grid 3 Top', grid3_top],
['Grid 4 Bottom', grid4_bot],
['Grid 4 Top', grid4_top],
['Grid 5 Bottom', grid5_bot],
['Grid 5 Top', grid5_top],
['Grid 6 Bottom', grid6_bot],
['Grid 6 Top', grid6_top],
['Grid 7 Bottom', grid7_bot],
['Grid 7 Top', grid7_top],
['Top of Active Absorber', bpra_Active_top],
['Top of Active Fuel', fuel_ActiveFuel_top],
['Control Rod Step 228', '{:.6g}'.format(float(rcca_StepWidth)*228+float(rcca_Rod_bot))],
['Grid 8 Bottom', grid8_bot],
['Grid 8 Top', grid8_top],
['Top of Fuel Rod Plenum', fuel_UpperFitting_bot],
['Top of BPRA Rod Plenum', bpra_Plenum_top],
['Top of Fuel Rod', fuel_Rod_top],
['Bottom of Upper Nozzle', struct_UpperNozzle_bot],
['Top of Upper Nozzle', struct_UpperNozzle_top],
['Highest Extent', struct_HighestExtent],]
all_planes += [['Bottom of Lower Absorber (AIC)', rcca_AIC_bot],
['Bottom of Upper Absorber (B4C)', rcca_B4C_bot],
['Bottom of Spacer', rcca_Spacer_bot],
['Bottom of Control Rod Plenum', rcca_Plenum_bot],
['Top of Control Rod Plenum', rcca_Plenum_top],]
# convert into a dictionary for use in figures
d = {}
d.update(all_planes)
all_planes = d
def main(base):
make_aggregate_fig(base)
make_fuel_rod(base)
make_gtu_rod(base)
make_instr_rod(base)
make_ba_rod(base)
make_cr_rod(base)
def make_aggregate_fig(base):
outp = os.path.join(base,"specifications{0}axial{0}figs{0}all_axials.tex".format(os.sep))
cap = "\emph{Left}: Scale view of row 8 axial cross section, with highlighted grid spacers and partial insertion of control rod bank D to the bite position. \emph{Right}: exhaustive list of all axial planes used in the model, excluding partial control rod insertion planes."
scap = "Scale view of all axial planes."
l = "fig_all_axials"
s = 1
# if the planes change, this is the only place to update them
axials = [ 'Lowest Extent',
'Bottom of Support Plate',
'Bottom of Fuel Rod',
'Bottom of Active Fuel',
'Grid 1 Bottom',
'Bot. of BPRA Rod',
'Control Rod Step 0',
'Grid 1 Top',
'Bottom of Active Absorber',
'Bottom of Lower Absorber (AIC)',
'Grid 2 Bottom',
'Grid 2 Top',
'Grid 3 Bottom',
'Grid 3 Top',
'Grid 4 Bottom',
'Grid 4 Top',
'Grid 5 Bottom',
'Grid 5 Top',
'Grid 6 Bottom',
'Grid 6 Top',
'Grid 7 Bottom',
'Grid 7 Top',
'Control Rod Step 228',
'Top of Active Absorber',
'Top of Active Fuel',
'Bottom of Control Rod Plenum',
'Grid 8 Bottom',
'Grid 8 Top',
'Top of Control Rod Plenum',
'Top of Fuel Rod Plenum',
'Top of Fuel Rod',
'Top of BPRA Rod Plenum',
'Bottom of Upper Nozzle',
'Top of Upper Nozzle',
'Highest Extent']
# get ordered list
axials = [[a,all_planes[a]] for a in axials]
# desired figure height
figH = 4.0
# actual figure dimentions in inches
picH = 27.774
picW = 27.774
figW = figH*picW/picH
barrelIR = 161.2773*figH/float(axials[-1][1])
tikzpic = r"""
\draw[white] (-{1},-{2}) rectangle ({1},{2});
\node {{\pgftext{{\includegraphics[width={0}in]{{specifications/axial/figs/row_8_mats_axial_grids_enhanced.png}}}}}};""".format(
figW,figW/2,figH/2)
for i,ax in enumerate(axials):
tikzpic += "\n \draw[red] ({0},{1}) -- ({2},{1}) -- ({3},{4}) -- ({6},{4}) node[black,right,anchor=west,font=\scriptsize] {{{5}}};".format(
barrelIR,
float(ax[1])*figH/float(axials[-1][1])-figH/2,
figW/2+0.2,
figW/2+0.4,
figH*i/(len(axials)-1)-figH/2,
"~{0} ~~~~~~~~ {1}".format(ax[1],ax[0]),
figW/2+0.55)
tikzpic += "\n \draw ({0},{1}) node[left,anchor=west,font=\scriptsize] {{\underline{{Elevation (cm)}} ~~~ \underline{{Description}}}};".format(figW/2+0.4,figH/2 + figH/(len(axials)-1))
mat = ""
outStr = fig_t.format(tikzpic=tikzpic,matrix=mat,shortcap=scap,caption=cap,label=l,scale=s)
with open(outp,'w') as fh:
fh.write(outStr)
def make_fuel_rod(base):
outp = os.path.join(base,"specifications{0}axial{0}figs{0}fuel_rod.tex".format(os.sep))
cap = "Fuel rod pincell axial specification."
scap = "Fuel rod pincell axial specification"
l = "fig_fuel_axials"
s = 1
figH = 5.0
width = 3
# the third entry is the text above the specified plane
## changed so the axial height here isn't used - the global all_planes is
axials = [ ['Lowest Extent', '0', 'Water', 'mat_water', r""],
['Bottom of Support Plate', '50.8', 'Nozzle / Support Plate Stainless Steel', 'mat_ss_spn', r"\ref{num:missing}"],
['Bottom of Fuel Rod', '66.18352', 'Zircaloy Pin', 'mat_zirc', r"\ref{num:catawba}"],
['Bottom of Active Fuel', '67.02172', 'Fuel Rod Pincell', 'fig_fuel_pin', r"\ref{num:fuelheight}"],
['Grid 1 Bottom', '68.16472', 'Fuel Rod Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 1 Top', '71.5226', 'Fuel Rod Pincell', 'fig_fuel_pin', r"\ref{num:fuelheight}"],
['Grid 2 Bottom', '130.21692', 'Fuel Rod Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 2 Top', '133.5748', 'Fuel Rod Pincell', 'fig_fuel_pin', r"\ref{num:fuelheight}"],
['Grid 3 Bottom', '182.41392', 'Fuel Rod Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 3 Top', '185.7718', 'Fuel Rod Pincell', 'fig_fuel_pin', r"\ref{num:fuelheight}"],
['Grid 4 Bottom', '234.61092', 'Fuel Rod Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 4 Top', '237.9688', 'Fuel Rod Pincell', 'fig_fuel_pin', r"\ref{num:fuelheight}"],
['Grid 5 Bottom', '286.80792', 'Fuel Rod Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 5 Top', '290.1658', 'Fuel Rod Pincell', 'fig_fuel_pin', r"\ref{num:fuelheight}"],
['Grid 6 Bottom', '339.00492', 'Fuel Rod Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 6 Top', '342.3628', 'Fuel Rod Pincell', 'fig_fuel_pin', r"\ref{num:fuelheight}"],
['Grid 7 Bottom', '391.20192', 'Fuel Rod Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 7 Top', '394.5598', 'Fuel Rod Pincell', 'fig_fuel_pin', r"\ref{num:fuelheight}"],
['Top of Active Fuel', '432.78172', 'Fuel Rod Plenum Pincell', 'fig_fuel_pin', r"\ref{num:catawba}"],
['Grid 8 Bottom', '443.50052', 'Fuel Rod Plenum Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 8 Top', '446.8584', 'Fuel Rod Plenum Pincell', 'fig_fuel_pin', r"\ref{num:catawba}"],
['Top of Fuel Rod Plenum', '452.23812', 'Zircaloy Pin', 'mat_zirc', r"\ref{num:catawba}"],
['Top of Fuel Rod', '454.29552', 'Water', 'mat_water', r"\ref{num:catawba}"],
['Bottom of Upper Nozzle', '457.6407', 'Nozzle / Support Plate Stainless Steel', 'mat_ss_spn', r"\ref{num:watts_bar}"],
['Top of Upper Nozzle', '466.4672', 'Water', 'mat_water', r"\ref{num:watts_bar}"],
['Highest Extent', '517.2672', 'Water', 'mat_water', ''],]
axials = [[a[0],all_planes[a[0]],a[2],a[3],a[4]] for a in axials]
mat = ""
tikzpic = ""
for i,ax in enumerate(axials[:-1]):
tikzpic += """\n \\node[inner sep=0pt,
text width={w} in,
minimum size={h} in,
draw=black,
align=center,
shift={{(0,{s})}},
hyperlink node={hyper}] (n{0}) {{{fill}}};""".format(i,fill=ax[2],w=width,h=figH/(len(axials)-1),s=i*figH/(len(axials)-1),hyper=ax[3])
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(i-0.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(ax[1],ax[0]))
tikzpic += """\n \\node[anchor=east] (s{0}) at (n{0}.west) {{{1}}};""".format(i,ax[4])
tikzpic += """\n \\path let \p1 = (n{0}.west) in node[anchor=west] (source) at (\\x1,{h}) {{\underline{{Source Reference}}}};""".format(i,w=0,h=(len(axials)-0.5)*figH/(len(axials)-1),)
tikzpic += """\n \draw[->] (source.west) -| (s{0}.north);""".format(i)
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(len(axials)-1.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(axials[-1][1],axials[-1][0]))
tikzpic += """\n \draw ({w},{h}) node[right,anchor=west] {{{text}}};""".format(w=width/2,h=(len(axials)-0.5)*figH/(len(axials)-1),
text="\underline{Elevation (cm)} ~ \underline{Description}")
outStr = fig_t.format(tikzpic=tikzpic,matrix=mat,shortcap=scap,caption=cap,label=l,scale=s)
with open(outp,'w') as fh:
fh.write(outStr)
def make_gtu_rod(base):
outp = os.path.join(base,"specifications{0}axial{0}figs{0}guide_tube.tex".format(os.sep))
cap = "Empty guide tube pincell axial specification."
scap = "Empty guide tube pincell axial specification"
l = "fig_gtu_axials"
s = 1
figH = 5.0
width = 3
# the third entry is the text above the specified plane
## changed so the axial height here isn't used - the global all_planes is
axials = [ ['Lowest Extent', '0', 'Water', 'mat_water', r""],
['Bottom of Support Plate', '20.0', 'Nozzle / Support Plate Borated Water', 'mat_water_spn', r"\ref{num:missing}"],
['Bottom of Fuel Rod', '66.18352', 'Dashpot Guide Tube', 'fig_guidetube_da_pin', r"\ref{num:gtu_axials}"],
Fix wrong position of Dashpot in guide tube figure
2019-03-22 12:48:13 -07:00
['Grid 1 Bottom', '68.16472', 'Dashpot Guide Tube w/ Grid', 'fig_guidetube_da_pin', r"\ref{num:gtu_axials}"],
['Control Rod Step 0', '71.5226', 'Guide Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 1 Top', '74.59092', 'Guide Tube Pincell', 'fig_guidetube_pin', r"\ref{num:gtu_axials}"],
BEAVRS v3.0
2018-08-29 08:31:36 -07:00
['Grid 2 Bottom', '130.21692', 'Guide Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 2 Top', '133.5748', 'Guide Tube Pincell', 'fig_guidetube_pin', r"\ref{num:gtu_axials}"],
['Grid 3 Bottom', '182.41392', 'Guide Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 3 Top', '185.7718', 'Guide Tube Pincell', 'fig_guidetube_pin', r"\ref{num:gtu_axials}"],
['Grid 4 Bottom', '234.61092', 'Guide Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 4 Top', '237.9688', 'Guide Tube Pincell', 'fig_guidetube_pin', r"\ref{num:gtu_axials}"],
['Grid 5 Bottom', '286.80792', 'Guide Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 5 Top', '290.1658', 'Guide Tube Pincell', 'fig_guidetube_pin', r"\ref{num:gtu_axials}"],
['Grid 6 Bottom', '339.00492', 'Guide Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 6 Top', '342.3628', 'Guide Tube Pincell', 'fig_guidetube_pin', r"\ref{num:gtu_axials}"],
['Grid 7 Bottom', '391.20192', 'Guide Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 7 Top', '394.5598', 'Guide Tube Pincell', 'fig_guidetube_pin', r"\ref{num:gtu_axials}"],
['Grid 8 Bottom', '443.50052', 'Guide Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 8 Top', '446.8584', 'Guide Tube Pincell', 'fig_guidetube_pin', r"\ref{num:gtu_axials}"],
['Bottom of Upper Nozzle', '517.2672', 'Nozzle / Support Plate Borated Water', 'mat_water_spn', r"\ref{num:watts_bar}"],
['Top of Upper Nozzle', '517.2672', 'Water', 'mat_water', r"\ref{num:watts_bar}"],
['Highest Extent', '517.2672', 'Water', 'mat_water', ''],]
axials = [[a[0],all_planes[a[0]],a[2],a[3],a[4]] for a in axials]
mat = ""
tikzpic = ""
for i,ax in enumerate(axials[:-1]):
tikzpic += """\n \\node[inner sep=0pt,
text width={w} in,
minimum size={h} in,
draw=black,
align=center,
shift={{(0,{s})}},
hyperlink node={hyper}] (n{0}) {{{fill}}};""".format(i,fill=ax[2],w=width,h=figH/(len(axials)-1),s=i*figH/(len(axials)-1),hyper=ax[3])
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(i-0.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(ax[1],ax[0]))
tikzpic += """\n \\node[anchor=east] (s{0}) at (n{0}.west) {{{1}}};""".format(i,ax[4])
tikzpic += """\n \\path let \p1 = (n{0}.west) in node[anchor=west] (source) at (\\x1,{h}) {{\underline{{Source Reference}}}};""".format(i,w=0,h=(len(axials)-0.5)*figH/(len(axials)-1),)
tikzpic += """\n \draw[->] (source.west) -| (s{0}.north);""".format(i)
tikzpic += """\n \draw ({w},{h}) node[right,anchor=west] {{{text}}};""".format(w=width/2,h=(len(axials)-0.5)*figH/(len(axials)-1),
text="\underline{Elevation (cm)} ~ \underline{Description}")
outStr = fig_t.format(tikzpic=tikzpic,matrix=mat,shortcap=scap,caption=cap,label=l,scale=s)
with open(outp,'w') as fh:
fh.write(outStr)
def make_instr_rod(base):
outp = os.path.join(base,"specifications{0}axial{0}figs{0}instr_tube.tex".format(os.sep))
cap = "Instrument tube pincell axial specification."
scap = "Instrument tube pincell axial specification"
l = "fig_instr_axials"
s = 1
figH = 5.0
width = 3
# the third entry is the text above the specified plane
## changed so the axial height here isn't used - the global all_planes is
axials = [ ['Lowest Extent', '0', 'Bare Instr. Tube', 'fig_instr_pin_bare', r"\ref{num:instr_axials}"],
['Bottom of Support Plate', '20.0', 'Support Plate / Nozzle Borated Water', 'mat_water_spn', r"\ref{num:missing}"],
['Bottom of Fuel Rod', '66.18352', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Grid 1 Bottom', '68.16472', 'Instr. Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 1 Top', '71.5226', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Grid 2 Bottom', '130.21692', 'Instr. Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 2 Top', '133.5748', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Grid 3 Bottom', '182.41392', 'Instr. Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 3 Top', '185.7718', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Grid 4 Bottom', '234.61092', 'Instr. Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 4 Top', '237.9688', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Grid 5 Bottom', '286.80792', 'Instr. Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 5 Top', '290.1658', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Grid 6 Bottom', '339.00492', 'Instr. Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 6 Top', '342.3628', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Grid 7 Bottom', '391.20192', 'Instr. Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 7 Top', '394.5598', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Grid 8 Bottom', '443.50052', 'Instr. Tube Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 8 Top', '446.8584', 'Instr. Tube Pincell', 'fig_instr_pin', r"\ref{num:instr_axials}"],
['Bottom of Upper Nozzle', '517.2672', 'Water', 'mat_water', r"\ref{num:watts_bar}"],
['Highest Extent', '517.2672', '', '', ''],]
axials = [[a[0],all_planes[a[0]],a[2],a[3],a[4]] for a in axials]
mat = ""
tikzpic = ""
for i,ax in enumerate(axials[:-1]):
tikzpic += """\n \\node[inner sep=0pt,
text width={w} in,
minimum size={h} in,
draw=black,
align=center,
shift={{(0,{s})}},
hyperlink node={hyper}] (n{0}) {{{fill}}};""".format(i,fill=ax[2],w=width,h=figH/(len(axials)-1),s=i*figH/(len(axials)-1),hyper=ax[3])
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(i-0.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(ax[1],ax[0]))
tikzpic += """\n \\node[anchor=east] (s{0}) at (n{0}.west) {{{1}}};""".format(i,ax[4])
tikzpic += """\n \\path let \p1 = (n{0}.west) in node[anchor=west] (source) at (\\x1,{h}) {{\underline{{Source Reference}}}};""".format(i,w=0,h=(len(axials)-0.5)*figH/(len(axials)-1),)
tikzpic += """\n \draw[->] (source.west) -| (s{0}.north);""".format(i)
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(len(axials)-1.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(axials[-1][1],axials[-1][0]))
tikzpic += """\n \draw ({w},{h}) node[right,anchor=west] {{{text}}};""".format(w=width/2,h=(len(axials)-0.5)*figH/(len(axials)-1),
text="\underline{Elevation (cm)} ~ \underline{Description}")
outStr = fig_t.format(tikzpic=tikzpic,matrix=mat,shortcap=scap,caption=cap,label=l,scale=s)
with open(outp,'w') as fh:
fh.write(outStr)
def make_ba_rod(base):
outp = os.path.join(base,"specifications{0}axial{0}figs{0}ba.tex".format(os.sep))
cap = "Burnable absorber pincell axial specification."
scap = "Burnable absorber pincell axial specification"
l = "fig_ba_axials"
s = 1
figH = 6.0
width = 3
# the third entry is the text above the specified plane
## changed so the axial height here isn't used - the global all_planes is
axials = [ ['Lowest Extent', '0', 'Water', 'mat_water', r""],
['Bottom of Support Plate', '20.0', 'Support Plate / Nozzle Borated Water', 'mat_water_spn', r"\ref{num:missing}"],
['Bottom of Fuel Rod', '', 'Dashpot Guide Tube', 'fig_guidetube_da_pin', r"\ref{num:gtu_axials}"],
['Grid 1 Bottom', '68.16472', 'Dashpot Guide Tube w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Bot. of BPRA Rod', '', 'SS Pin in Dashpot GT w/ Grid', 'mat_SS304', r"\ref{num:ba_axials}"],
['Control Rod Step 0', '74.59092', 'SS Pin in GT w/ Grid', 'mat_SS304', r"\ref{num:ba_axials}"],
['Grid 1 Top', '', 'Stainless Steel Pin in GT', 'mat_SS304', r"\ref{num:ba_axials}"],
['Bottom of Active Absorber', '', 'Burnable Absorber Pincell', 'fig_ba_pin', r"\ref{num:ba_axials}"],
['Grid 2 Bottom', '130.21692', 'Burnable Absorber Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 2 Top', '133.5748', 'Burnable Absorber Pincell', 'fig_ba_pin', r"\ref{num:ba_axials}"],
['Grid 3 Bottom', '182.41392', 'Burnable Absorber Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 3 Top', '185.7718', 'Burnable Absorber Pincell', 'fig_ba_pin', r"\ref{num:ba_axials}"],
['Grid 4 Bottom', '234.61092', 'Burnable Absorber Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 4 Top', '237.9688', 'Burnable Absorber Pincell', 'fig_ba_pin', r"\ref{num:ba_axials}"],
['Grid 5 Bottom', '286.80792', 'Burnable Absorber Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 5 Top', '290.1658', 'Burnable Absorber Pincell', 'fig_ba_pin', r"\ref{num:ba_axials}"],
['Grid 6 Bottom', '339.00492', 'Burnable Absorber Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 6 Top', '342.3628', 'Burnable Absorber Pincell', 'fig_ba_pin', r"\ref{num:ba_axials}"],
['Grid 7 Bottom', '391.20192', 'Burnable Absorber Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 7 Top', '394.5598', 'Burnable Absorber Pincell', 'fig_ba_pin', r"\ref{num:ba_axials}"],
['Top of Active Absorber', '', 'BPRA Rod Plenum Pincell', 'fig_ba_pin_plenum', r"\ref{num:ba_axials}"],
['Grid 8 Bottom', '443.50052', 'BPRA Rod Plenum Pincell w/ Grid', 'grid_spec', r"\ref{num:grid_spacer}"],
['Grid 8 Top', '446.8584', 'BPRA Rod Upper Plenum Pincell', 'fig_ba_pin_plenum', r"\ref{num:ba_axials}"],
['Top of BPRA Rod Plenum', '454.29552', 'Stainless Steel Pin in GT','mat_SS304', r"\ref{num:ba_axials}"],
['Bottom of Upper Nozzle', '', 'Stainless Steel Pin','mat_SS304', r"\ref{num:ba_axials}"],
['Top of Upper Nozzle', '454.29552', 'Water','mat_water', r"\ref{num:watts_bar}"],
['Highest Extent', '517.2672', '', '', ''],]
axials = [[a[0],all_planes[a[0]],a[2],a[3],a[4]] for a in axials]
mat = ""
tikzpic = ""
for i,ax in enumerate(axials[:-1]):
tikzpic += """\n \\node[inner sep=0pt,
text width={w} in,
minimum size={h} in,
draw=black,
align=center,
shift={{(0,{s})}},
hyperlink node={hyper}] (n{0}) {{{fill}}};""".format(i,fill=ax[2],w=width,h=figH/(len(axials)-1),s=i*figH/(len(axials)-1),hyper=ax[3])
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(i-0.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(ax[1],ax[0]))
tikzpic += """\n \\node[anchor=east] (s{0}) at (n{0}.west) {{{1}}};""".format(i,ax[4])
tikzpic += """\n \\path let \p1 = (n{0}.west) in node[anchor=west] (source) at (\\x1,{h}) {{\underline{{Source Reference}}}};""".format(i,w=0,h=(len(axials)-0.5)*figH/(len(axials)-1),)
tikzpic += """\n \draw[->] (source.west) -| (s{0}.north);""".format(i)
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(len(axials)-1.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(axials[-1][1],axials[-1][0]))
tikzpic += """\n \draw ({w},{h}) node[right,anchor=west] {{{text}}};""".format(w=width/2,h=(len(axials)-0.5)*figH/(len(axials)-1),
text="\underline{Elevation (cm)} ~ \underline{Description}")
outStr = fig_t.format(tikzpic=tikzpic,matrix=mat,shortcap=scap,caption=cap,label=l,scale=s)
with open(outp,'w') as fh:
fh.write(outStr)
def make_cr_rod(base):
outp = os.path.join(base,"specifications{0}axial{0}figs{0}cr.tex".format(os.sep))
cap = "Control rod pincell axial specification when fully-inserted. This only shows axial sections for the control rod itself, which is inside one of the guide tubes."
scap = "Control rod pincell axial specification"
l = "fig_cr_axials"
s = 1
figH = 2.0
width = 3.4
# the third entry is the text above the specified plane
## changed so the axial height here isn't used - the global all_planes is
axials = [ ['Lowest Extent', '0', 'Water', 'mat_water', r""],
['Bottom of Support Plate', '20.0', 'Support Plate / Nozzle Borated Water', 'mat_water_spn', r"\ref{num:missing}"],
['Bottom of Fuel Rod', '66.18352', 'Water', 'mat_water', r""],
['Control Rod Step 0', '', 'Stainless Steel Pin', 'mat_SS304', r"\ref{num:control_rod_axials}"],
['Bottom of Lower Absorber (AIC)', '', 'Control Rod Lower Absorber Pincell', 'fig_cr_pin', r"\ref{num:control_rod_axials}"],
['Bottom of Upper Absorber (B4C)', '', 'Control Rod Upper Absorber Pincell', 'fig_cr_pin_upper', r"\ref{num:control_rod_axials}"],
['Bottom of Spacer', '', 'Control Rod Spacer Pincell', 'fig_cr_pin_spacer', r"\ref{num:control_rod_axials}"],
['Bottom of Control Rod Plenum', '', 'Control Rod Upper Plenum', 'fig_cr_pin_plenum', r"\ref{num:control_rod_axials}"],
['Top of Control Rod Plenum', '', 'Stainless Steel Pin', 'mat_SS304', r"\ref{num:control_rod_axials}"],
['Highest Extent', '517.2672', 'Water', 'mat_water', ''],]
axials = [[a[0],all_planes[a[0]],a[2],a[3],a[4]] for a in axials]
mat = ""
tikzpic = ""
for i,ax in enumerate(axials[:-1]):
if ax[0] == 'Control Rod Step 0': ax[0] = 'Bottom of Control Rod'
d = 'black'
tikzpic += """\n \\node[inner sep=0pt,
text width={w} in,
minimum size={h} in,
draw={draw},
align=center,
shift={{(0,{s})}},
hyperlink node={hyper}] (n{0}) {{{fill}}};""".format(i,fill=ax[2],w=width,h=figH/(len(axials)-1),s=i*figH/(len(axials)-1),hyper=ax[3],draw=d)
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(i-0.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(ax[1],ax[0]))
tikzpic += """\n \\node[anchor=east] (s{0}) at (n{0}.west) {{{1}}};""".format(i,ax[4])
tikzpic += """\n \\path let \p1 = (n{0}.west) in node[anchor=west] (source) at (\\x1,{h}) {{\underline{{Source Reference}}}};""".format(i,w=0,h=(len(axials)-0.5)*figH/(len(axials)-1),)
tikzpic += """\n \draw[->] (source.west) -| (s{0}.north);""".format(i)
tikzpic += """\n \draw[->] ({w2},{h}) node[right,anchor=west] {{{text}}} -- ({w},{h});""".format(w=width/2,h=(len(axials)-1.5)*figH/(len(axials)-1),w2=width/2+0.2,text="{0} ~~~~~~~ {1}".format(axials[-1][1],axials[-1][0]))
tikzpic += """\n \draw ({w},{h}) node[right,anchor=west] {{{text}}};""".format(w=width/2,h=(len(axials)-0.5)*figH/(len(axials)-1),
text="\underline{Elevation (cm)} ~ \underline{Description}")
outStr = fig_t.format(tikzpic=tikzpic,matrix=mat,shortcap=scap,caption=cap,label=l,scale=s)
with open(outp,'w') as fh:
fh.write(outStr)
if __name__ == "__main__":
try:
basedir = sys.argv[1]
except:
basedir = ".."
main(basedir)
Reference in a new issue Copy permalink