130 lines
5.9 KiB
TeX
130 lines
5.9 KiB
TeX
\section*{Changelog}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{3/22/19 - 3.0.1}
|
|
\begin{itemize}
|
|
\item Fixed the axial position of the dashpot in the guide tube
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{5/22/18 - 3.0}
|
|
\begin{itemize}
|
|
\item Introduced uncertainty quantification of measurements
|
|
\item Deleted inconsistent boron letdown data
|
|
\item Corrected weight of Inconel per Top/Bottom grid listing in the table of
|
|
fuel assembly parammeters
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{10/30/17 - 2.0.2}
|
|
\begin{itemize}
|
|
\item Update Cycle 2 Power History plot to include correct End of Cycle
|
|
\item Re-calculated all material compositions using latest isotopic natural
|
|
abundances data, IUPAC 2013
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{10/26/16 - 2.0.1}
|
|
\begin{itemize}
|
|
\item Corrected the critical Boron concentration from 1237 to 1273 ppm in Cycle 2
|
|
\item Improved re-alignment algorithm in processing measurement data
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{09/06/16 - 2.0}
|
|
\begin{itemize}
|
|
\item Slight shifts to all axial planes
|
|
\item Added B4C control rod material and updated the control rod specification
|
|
\item Updated the grid spacer specifications with more accurate heights
|
|
\item Updated the control rod 0\% withdrawn axial location
|
|
\item Updated the burnable poison insertion axial location
|
|
\item Added upper plenum and end plugs to burnable poison rods
|
|
\item Added upper plenum, end plugs, and spacer region to control rods
|
|
\item Changed from air to helium for control rod and control rod gaps
|
|
\item Updated neutron shield panel specification
|
|
\item Updated RPV geometry and material specification
|
|
\item Added the core liner
|
|
\item Added water gap between fuel assemblies and baffle
|
|
\item Added new materials for nozzle and support plate structure to conserve
|
|
mass and volume fractions
|
|
\item Added inlet coolant temperature measurements
|
|
\item Added tilt-corrected data
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{10/16/13 - 1.1.1}
|
|
\begin{itemize}
|
|
\item Added new bare instrument thimble figure and additional clarification
|
|
regarding instrument tubes below the dashpot.
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{10/16/13 - 1.1}
|
|
\begin{itemize}
|
|
\item Added cycle 2 information: shuffling pattern, burnable absorbers, fresh
|
|
assembly materials specification, zero power physics test data. For
|
|
differences and additions see Tables \ref{overview_table},
|
|
\ref{mat_fuel16}-\ref{mat_fuel34}, and \ref{tbl:meas_c2phys}, Sources
|
|
\ref{num:fuel32_mat}, \ref{num:fuel34_mat} and \ref{num:assy_load_c2},
|
|
Sections \ref{sec:ba_configs}, \ref{sec:corespec_enrba},
|
|
\ref{sec:hzp_data_disc} and \ref{sec:available_data}, and Figures
|
|
\ref{ass_4ba}, \ref{ass_8ba}, \ref{ass_12ba_c2}, and
|
|
\ref{fig_enr_ba_pos_c2}.
|
|
\item Added note in Section \ref{sec:available_data} regarding quality of
|
|
detector trace data
|
|
\item Added new materials for cycle 2 enrichments
|
|
\item Added detailed assembly loadings (fresh fuel only) for cycle 2
|
|
\item All mass densities (and number densities) of fuel have been changed to
|
|
agree with exact fuel pin dimensions reported in specification
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{2/21/13 - 1.0.1}
|
|
\begin{itemize}
|
|
\item Inconel was misreported as the grid material in Figure \ref{fig_grid_pin_i}, changed to Zircaloy
|
|
\item Grid thickness reported in the caption of Figure \ref{fig_grid_pin_tb} did not match figure
|
|
\item Grid thickness reported in the caption of Figure \ref{fig_grid_pin_i} did not match figure
|
|
\item Grid strap thickness reported in the caption of Figure \ref{fig_grid_assembly} did not match figure
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{1/31/13 - 1.0}
|
|
\begin{itemize}
|
|
\item Changed Mass density and composition of SS304
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{1/18/13 - 0.2.5}
|
|
\begin{itemize}
|
|
\item Updated RPV thickness to accurate source
|
|
\item Updated inconel spring mass and dimension to approximate source
|
|
\item Changed top/bottom egg-crate dimensions to properly conserve inconel
|
|
mass. Top/bottom grids now have different radial dimensions vs. intermediate
|
|
grids for the egg-crate.
|
|
\item Hot Zero Power temperature was changed from 560 K to 560 F.
|
|
\item All Fuel material mass and number densities have been changed to reflect
|
|
actual core-averaged Uranium assembly loading for each enrichment.
|
|
\item Burnable absorber specification was changed so that the active poison
|
|
extends from the top of the active fuel to 2 in. above the bottom of the
|
|
active fuel. The blank pin above burnable absorbers was also changed from
|
|
Zircaloy to Stainless Steel.
|
|
\item Added air gap to control rods
|
|
\item Changed Ag-In-Cd cladding material to SS304
|
|
\item Changed water density to reflect boron in it (changed boron num dens)
|
|
\item Fixed Air mass density, factor of 10 lower
|
|
\item Changed RPV inner and outer radii
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{12/17/12 - 0.2.4}
|
|
\begin{itemize}
|
|
\item Revised instrument tube and burnable absorber tube pincell details above
|
|
active fuel regions.
|
|
\end{itemize}
|
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
|
\subsection*{12/4/12 - 0.2.3}
|
|
\begin{itemize}
|
|
\item Changed instrument tube and guide tube pincell details above and below
|
|
active fuel regions.
|
|
\end{itemize}
|